Hi, Unless there has been a recent change, you can't set codecs in the sip.conf on a per-context basis. The way to do what you want is to have the following in the [general] area:
disallow=all allow=ulaw allow=alaw allow=g729 Then, set all the codec preferences on the g729 phone to g729. That phone should then only be able to negotiate g729. If this doesn't work then I suspect some sort of g729 codec installation error? Tan -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Dave Alan Caruana Sent: 03 October 2003 11:49 To: [EMAIL PROTECTED] Subject: [Asterisk-Users] Budgettone + G729 hi there .. I asked sometime ago regarding getting a Budgettone working with Asterisk over G729. My system is quite simple, Asterisk server with 1 G 729 license installed, and 10 Grandstream phones. Only one of them needs G729, because it's on a remote link via an ADSL bridge. The rest run happily on G711 on a local network. I added the lines disallow=all allow=g729 to the sip.conf entry for that particular phone, but it doesn't seem to have made any difference. If I remove the "allow = g729" line, which supposedly should leave no codecs at all, the phone still works, on G711. With the allow=g729 line in place, and switching off all codec options except g729 from the phone, when I try to for example dial extension 1000, which should give me Asterisk's welcome message, I get a message about "no matching codecs" on the asterisk console, so obviously the g729 codec isn't working. Can somebody help? cheers Dave _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
