>
> >We have a poweredge 2850 that we use for our VoIP server and it has 3 PCI
> >slots.
> I'm greeting to hear this. I have installed some Digium cards into this
> kind of servers.
> I get surprised when the slots pci gets shared IRQ with ethernet
> devices, raid controller or VGA card.
> Anybody knows how get unshare the IRQ of the slots pci ? (firmware,
> update, some special BIOS configuration,...)
> We answered Dell with no response.
I can't say that I've had this problem with the 2850 we have. I also
can't take the server down to look at it right now, however we just
got another digium card which I need to put in at some point over the
next few days, so I'll be taking it down sometimes soon.
As far as sharing, make sure you have disabled everything you don't
need.... USB, SERIAL, PARALLEL, etc.
You can then set the PCI IRQ in the BIOS, I believe.
CPU0 CPU1
0: 584222710 584230408 IO-APIC-edge timer
1: 0 7 IO-APIC-edge keyboard
2: 0 0 XT-PIC cascade
8: 0 1 IO-APIC-edge rtc
14: 0 2 IO-APIC-edge ide0
38: 6712019 8751310 IO-APIC-level megaraid
48: 318573642 37 IO-APIC-level eth0
77: 1014625786 2080170691 IO-APIC-level t1xxp
_______________________________________________
--Bandwidth and Colocation sponsored by Easynews.com --
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
