-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Lists
Pleasants
Sent: 05 November 2005 01:59
To: [email protected]
Subject: [Asterisk-Users] SIP extension calls itself intermittently
Intermittently Ill get calls from my only SIP extension to itself via the
Zap/1. I have no clue and have found nothing online. I have listed my
configurations and a sample of the console messages I see why debugging.
Right now it only happens to the 6000 extension. Any assistance is
appreciated.
Thanks,
Chip
-- Starting simple switch on 'Zap/1-1'
Nov 4 14:00:54 WARNING[4156]: chan_zap.c:5476 ss_thread: CallerID returned
with error on channel 'Zap/1-1'
-- Executing Wait("Zap/1-1", "2") in new stack
-- Executing Answer("Zap/1-1", "") in new stack
-- Executing Dial("Zap/1-1", "SIP/6000|20") in new stack
-- Called 6000
-- SIP/6000-3d34 is ringing
== Spawn extension (from-pstn, s, 3) exited non-zero on 'Zap/1-1'
-- Executing Hangup("Zap/1-1", "") in new stack
== Spawn extension (from-pstn, h, 1) exited non-zero on 'Zap/1-1'
-- Hungup 'Zap/1-1'
bart*CLI>
============================================================================
=================================================================
Chip,
The output above looks to me as an incoming call.
I think you would have seen the SIP extension calling on ZAP/1-1 if
initiated from your end, and would not call in as the line was busy.
I get this now and again in the UK, usually in an evening time when the
Telco do an auto check of line status.
Regards
Dave
_______________________________________________
--Bandwidth and Colocation sponsored by Easynews.com --
Asterisk-Users mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
