What if you separate the fax machine channels to diffrent contexts that don't call application Monitor ? It's for outgoing calls and for incoming calls if you have certain extensions for faxes you can call StopMonitor application.
regards Martin On Fri, 3 Oct 2003, Nicholas Romero wrote: > Is there a good way to detect FAX and Modem on a call that is established > and then take some sort of action? What I have is a situation that all > calls going out through an asterisk system are being recorded. Some of those > calls are internal fax machines or modems. When monitoring is turned on is > causes some funky transmission errors with the modems and sometimes Faxes to > the point where about 50% of the time the devices just give up. > > What I would like to do is if the systems detects a modem or a fax jump to > another point in the sequence that disables the monitoring. On inbound > calls this is more obvious but on outbound calls I am not sure of how to > accomplish it. > > Sort of an aside to this is that after I started recording all the calls I > have also seemed to introduce some echo somewhere. The echo was not present > before monitoring but not sure why it would introduce it either. > > Any help appreciated. > -Nicholas > > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users > _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
