Hi Folks, After doing extensive reading it seems that I am more confused than when I started out.
I have an Asustek ISDNLink (P-IN100-ST-D) BRI card. I know that it has a Winbond W6692 chipset, but there is much confusion in my head regarding whether to use bristuff (which seems to work with the HFC chipset - is this Winbond an HFC chipset or not?), mISDN, which from my reading is still somewhat unstable, ISDN4linux which seems to be feature poor or capi-channel (which seems to not be supported on this card, so that's easy!). I have, in the past, got this card working with the hisax driver to do dial-up to the ISP, but this driver seems to have been deprecated. I was wondering whether those guru's out there that have had success with their BRI cards could step forward. I am loathe to buy a AVM Fritz card as they are VERY expensive here and if I can get this card working - hey presto, since these thingies are very cheap. Thanks in advance, Hamish _______________________________________________ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
