You could get in touch with the company who is providing the settings for the Sipura adaptor (should be able to find out who it is from the Settings URL) & ask them to change the settings to be user-changable. The permissions for each setting is configured through the http configuration & it sounds like they have yours all set to be read only by the user.

I followed your steps to the letter but after resetting to factory defaults
unfortunately it still doesn't record the configuration changes I do.

2005/11/9, Adam Moffett <[EMAIL PROTECTED]>:
If you unplug the ethernet cable on a Sipura SPA and then reset the
power it'll boot up in a diagnostic mode.  When you pick up the phone
that's connected to it you'll get a dialtone and there are speical codes
you can dial to do various things.

Reset it to factory defaults by dialing **** followed by 73738#
full instructions are here:
http://www.sipura.com/Documents/faq/Section_3.html#4

Once you do that the provisioning enable should be "no" and you can
reconfigure the device however it needs to be.

Hi,

Thanks for your response.

I checked the setting, and indeed it was set to "yes". However, once I
change it to "no" and click on "apply" but after rebooting it's enabled
again (with all settings reverted to factory defaults, as usual).

Maxi.

2005/11/8, Rusty Dekema <[EMAIL PROTECTED]>:


It's possible that your SPA-2000 is set up to read a configuration file from a remote host every time it boots up, which would overwrite any changes you make. If you log in as admin and go to the advanced view, there is an option under the Provisioning tab called Provision Enable. Make sure that this is
set to "no" and your changes should remain in place.

-Rusty



On 11/8/05, Maximiliano J. Goldsmid <[EMAIL PROTECTED]> wrote:


Hello,

I have a problem with my Sipura 2000.
The problem is that it does not accept any change in the configuration.

When I access to it, via browser or phone, and make any change, after clicking "submit all changes" all the changes I made dissapear and teh
configuration remains with the original parameters.

So I need to know how can I work it out.

Thank you very much.
Maxi

_______________________________________________
--Bandwidth and Colocation sponsored by Easynews.com --

Asterisk-Users mailing list
[email protected]




http://lists.digium.com/mailman/listinfo/asterisk-users


To UNSUBSCRIBE or update options visit:




http://lists.digium.com/mailman/listinfo/asterisk-users



_______________________________________________
--Bandwidth and Colocation sponsored by Easynews.com --

Asterisk-Users mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:

http://lists.digium.com/mailman/listinfo/asterisk-users





_______________________________________________
--Bandwidth and Colocation sponsored by Easynews.com --

Asterisk-Users mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
 http://lists.digium.com/mailman/listinfo/asterisk-users



_______________________________________________
--Bandwidth and Colocation sponsored by Easynews.com --

Asterisk-Users mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
  http://lists.digium.com/mailman/listinfo/asterisk-users


_______________________________________________
--Bandwidth and Colocation sponsored by Easynews.com --

Asterisk-Users mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
  http://lists.digium.com/mailman/listinfo/asterisk-users

_______________________________________________
--Bandwidth and Colocation sponsored by Easynews.com --

Asterisk-Users mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
  http://lists.digium.com/mailman/listinfo/asterisk-users

_______________________________________________
--Bandwidth and Colocation sponsored by Easynews.com --

Asterisk-Users mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
  http://lists.digium.com/mailman/listinfo/asterisk-users

Reply via email to