>>>>> "Steve" == Steve Meyers <[EMAIL PROTECTED]> writes: Steve> On Thu, 2003-10-02 at 12:04, Jan Rychter wrote: >> I'm also hearing this, with an analog phone (connected to an >> S100U). Rather annoying. >> >> Incoming calls have an entirely different problem for me, a >> disastrous 5-8 second crackling/clicking sound, which seems to go >> quiet a while after you start speaking. The other side doesn't hear >> it, but it makes you miss the beginning of a call, e.g. you usually >> don't know who's calling :-/ This happens in a phone -> S100U -> * >> -> * -> X100P -> PSTN setup, when somebody is calling from the PSTN.
Steve> The first server that I set up asterisk on had the same problem. Steve> I was using BudgeTones and a couple X100P's. Internal calls had Steve> no echo, etc, but calls over the X100P's had tons of echo for Steve> 10-15 sec. We also got a beeping sound. Steve> However, since the problem didn't seem widespread among X100P Steve> users, we decided it might be our server hardware, which while Steve> decent spec wise, was on the cheap end quality wise. We got Steve> some nicer hardware, and the problem went away. Any chance you could describe the hardware? Was it a Via-based board? I have a setup where I use two *'s, both on Via boards. One is a Mini-ITX and the other is a full-form motherboard. Would interrupt-sharing between the X100P and another card cause this problem? (there is simply no way to avoid it on some hardware!) --J. _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
