Hi Markus I did the same to test one application on intelligent cards from Pikatechnologies. I had no E1 in office so I set up one Asterisk box with TE110P to simulate a CO. The only thing is to change support for protocol. In ZAPATA.CONF of one system use(the real PABX):
signalling = bri_cpe on the other(the CO simulator) signalling = bri_net Then use a cross E1 cable. Hope it helps! Ciao Mauro > Message: 11 > Date: Wed, 9 Nov 2005 18:45:37 +0100 > From: <[EMAIL PROTECTED]> > Subject: [Asterisk-Users] Test environment for a Predictive Dialer > To: <[email protected]> > Message-ID: <[EMAIL PROTECTED]> > Content-Type: text/plain; charset="iso-8859-1" > > Hello all, > > I'm thinking about to set up a test environment for a predictive dialler > with two asterisk machines. Each Asterisk should use a Digium TE110P card. > One machine should work as predictive dialler; the other box should simulate > the PSTN. > > - Is it in general possible to interconnect the two asterisk machines in > that way? Do I need any hardware in between to connect the two TE110P cards? > > > - Can I simulate the PSTN with a Digium TE110P card? > > Thanks and Regards > > Markus _______________________________________________ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
