Hi,
Just pulled out the BT-102 because I need to use it again, entered in
the TFTP server to get the latest firmware so its now in 1.0.6.7 and i
now was to factory default the phone and set it up from scratch..
I tried the instructions (copied below this message) from the latest
available version of the user guide on the Grandstream site but it
didn't appear to work..
Anyone got any idea how to factory reset these phones?
Thanks
8 Restore Factory Default Setting
Warning: Restore the Factory Default Setting will delete all
configuration information of the device.
Step one: Find the Mac Address of the device. The Mac address of the
device is located on the bottom of the device. It is a 12 digit number.
Step two: Encode the Mac address.
The encode rule is:
2 is the first letter on the button 2 so its encoding is 2 .
A is the second letter on button 2 so its encoding is 22 .
B is the third letter on button 2 and its encoding is 222 .
C is the fourth letter on button 2 and its encoding is 2222 .
3 is the first letter on the button 2 so its encoding is 3 .
D is the second letter on button 2 so its encoding is 33 .
E is the third letter on button 2 and its encoding is 333 .
F is the fourth letter on button 2 and its encoding is 3333 .
For example, the Mac address is 000b8200e395,
User should encode it as 0002228200333395 .
Step three: Access the phone screen menu, then select the -- reset --"
with the up or down arrows keys.
Step four: Dial in the encode of the Mac address. Once the correct
encode Mac address dial in, the device will reboot automatically and
restore the factory default setting.
_______________________________________________
--Bandwidth and Colocation sponsored by Easynews.com --
Asterisk-Users mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
