On Thu, 2005-11-10 at 07:18 -0600, Rich Adamson wrote: > > What kind of DTMF method signaling is "AVT" ? > > The sipura admin manual refers to AVT as a.k.a rfc2833. > > > My Sippura seems to support only InBand, AVT, INFO, InBand+Info, Auto > > INFO does not work with Asterisks voicemail system so it is useless for > > me. > > Auto works just fine for me.
What DTMF mode are you using with Sipura-3000 on Line1? My PSTN-Line is on Auto. Line1 - if I set it to AVT (rfc2833), and my sip.conf has dtmfmode=rfc2833, outgoing calls are not processing the DTMF signal (I get invalid number); incoming calls process extension correctly. If I set Line1 to Auto outgoing calls process DTMF signal correctly, by incoming calls can not dial any internal extension. > > I'm using Asterisk-1.0.8 > > Upgrade to something recent. I'll try Asterisk-1.0.9 -- #Joseph _______________________________________________ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
