> Don't know from the limited amount of data that you provided. Doh :) > Ensure you are loading wctdm driver (use 'lsmod' to see if > its loaded). > > run 'ztcfg -vv'
That produces: Channel 03: FXO Kewlstart (Default) (Slaves: 03) Channel 04: FXS Kewlstart (Default) (Slaves: 04) 2 channels configured. > use 'zttool' to see the TDM card and which modules are recognized. It sees the card, says 2 out of 4 lines/modules are configured > Don't plug the pstn line into the wrong module (rj11 jack) as > its likely to blow the module, particularily if ringing > voltage from the central office gets dumped into the fxs jack. It's definitely in the right socket, as the other channel connected to the phone line still gets answered after x rings, as I had setup on the X100. > Use 'zap show status' to understand what asterisk is seeing. That command doesn't seem to exist in my version? Having played some more, I think it's to do with asterisk or perhaps the odd dialplan I have set up - I've modified the extensions.conf file and the attached phone will ring and answer fine! I'll put the default confs back, see what happens and post again if theres still problems.. Andrew _______________________________________________ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
