On Sat, Nov 12, 2005 at 03:35:43PM +0800, Dulmandakh Sukhbaatar wrote: > I run debian sarge with kernel-image-2.6.8-2-686, compiled and installed > zaptel 1.2rc2 without any problem. Modules can be loaded without > problem. Also I have TDM04M or TDM card with 4 FXO modules. > > /etc/zaptel.conf contains, as mentioned in Asterisk. The Future of > telephony: > fxsks=1-4 > loadzone=us > defaultzone=us > > ztcfg -vv shows me: > Zaptel Configuration > ====================== > > > Channel map: > > Channel 01: FXS Kewlstart (Default) (Slaves: 01) > Channel 02: FXS Kewlstart (Default) (Slaves: 02) > Channel 03: FXS Kewlstart (Default) (Slaves: 03) > Channel 04: FXS Kewlstart (Default) (Slaves: 04) > > 4 channels configured. > > And connected my phone line to the TDM card, of cource RJ45. > > In Asterisk book: > Now that the FXO channel is configured, let’s test it. Run the zttool > application and > connect your PSTN line to the FXO port on your TDM400P. Once you have a > phone > line connected to your FXO port, you can watch the card come out of a > RED alarm. > > But nothing becomes red. Any suggestions? Please help and sorry for my > poor english.
Hmmm... Any problems? Anything not working? Can you dial through the FXO line from Asterisk? -- Tzafrir Cohen | [EMAIL PROTECTED] | VIM is http://tzafrir.org.il | | a Mutt's [EMAIL PROTECTED] | | best ICQ# 16849755 | | friend _______________________________________________ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
