overlapdial setting should work but you also have to set immediate=no if you want overlapdial to work
greetings mk 2005/11/13, Piotr Dydycz <[EMAIL PROTECTED]>: > I would like to ask you a question releted to Asterisk and libpri. I > was trying to find solution in internet but it failed. I have some > computers with Digium T1/E1 cards connected to terminating PBX's. In > most cases everything is allright and i can place calls to PSTN. But > there are PBX's such configured that they couldn't receive whole > number in SETUP message. They need to receive CPB digit by digit in > INFORMATION messeges. AFAIK it is called "overlap". Can > Asterisk/libpri can overlapdial such a PBX. I was trying to set > overlapdial=yes in zapata.conf but it didn't help. Is it possible to > overlapdial on pri interface? If so, It will be very nice if you tell > me how to configure it because it seems to be poor documented. I'm in > Europe/Poland, using E1, was trying different versions of > asterisk/zaptel/libri. Sorry for bad english and looking forward to > see your reply. Thanks a lot. > > -- > Piotr > _______________________________________________ > --Bandwidth and Colocation sponsored by Easynews.com -- > > Asterisk-Users mailing list > [email protected] > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > _______________________________________________ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
