The user "Asterisk" is a member of group "dialout" so he must have access to /dev/capi20. The kernel module capi.o seems to be loaded as you can see on lsmod output:
#lsmod Module Size Used by ipt_MASQUERADE 3968 3 ipt_state 2304 6 iptable_nat 22828 2 ipt_MASQUERADE ip_conntrack 32908 3 ipt_MASQUERADE,ipt_state,iptable_nat iptable_filter 3072 1 ip_tables 16896 4 ipt_MASQUERADE,ipt_state,iptable_nat,iptable_filter af_packet 20872 8 thermal 12944 0 fan 4236 0 button 6680 0 processor 13220 1 thermal ac 5132 0 ipv6 229764 18 fcusb 607384 0 capi 17728 0 kernelcapi 46624 2 fcusb,capi capifs 6024 2 capi evdev 9088 0 floppy 54992 0 8139cp 19072 0 pci_hotplug 30640 0 via_agp 8832 1 agpgart 31784 1 via_agp uhci_hcd 29328 0 usbcore 104164 4 fcusb,uhci_hcd 8139too 23936 0 mii 4864 2 8139cp,8139too sr_mod 15780 0 psmouse 17800 0 ide_cd 38176 0 cdrom 35740 2 sr_mod,ide_cd genrtc 9332 0 ext3 109672 4 jbd 54552 1 ext3 ide_generic 1664 0 via82cxxx 12956 1 unix 26036 47 and dmesg shows that capi and fcusb are started : capifs: Rev 1.1.2.3 CAPI Subsystem Rev 1.1.2.8 capi20: Rev 1.1.2.7: started up with major 68 (middleware+capifs) fcusb: module license 'Proprietary' taints kernel. fcusb: AVM FRITZ!Card USB driver, revision 0.6.4 fcusb: (fcusb built on Nov 10 2005 at 16:06:01) fcusb: -- 32 bit CAPI driver -- fcusb: Loading... usbcore: registered new driver fcusb fcusb: Loaded. Do you have another method to test if capi.o module is loaded or if it comes from the isdn card driver. Thanks. -----Message d'origine----- De : [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Envoyé : mardi 15 novembre 2005 10:14 À : amaury BOSSE Cc : Asterisk Users Mailing List - Non-Commercial Discussion Objet : RE: [Asterisk-Users] Fritz card usb v2.1 - Capi installation problem In that case the kernel module 'capi.o' may not be loaded, or the isdn card driver just does not work. Armin On Tue, 15 Nov 2005, amaury BOSSE wrote: > Hello, > As you can see bellow, the node /dev/capi20 exits and permissions seems to be good (read and write for user and group). > Do you have other ideas to help me to resolve this problem? > Thanks for your answer. > Amaury > > # ls -l /dev/capi* > crw-rw-rw- 1 root dialout 68, 0 2005-11-10 10:18 /dev/capi20 > crw-rw---- 1 root dialout 68, 1 2005-11-10 10:18 /dev/capi20.00 > crw-rw---- 1 root dialout 68, 2 2005-11-10 10:18 /dev/capi20.01 > crw-rw---- 1 root dialout 68, 3 2005-11-10 10:18 /dev/capi20.02 > crw-rw---- 1 root dialout 68, 4 2005-11-10 10:18 /dev/capi20.03 > crw-rw---- 1 root dialout 68, 5 2005-11-10 10:18 /dev/capi20.04 > crw-rw---- 1 root dialout 68, 6 2005-11-10 10:18 /dev/capi20.05 > crw-rw---- 1 root dialout 68, 7 2005-11-10 10:18 /dev/capi20.06 > crw-rw---- 1 root dialout 68, 8 2005-11-10 10:18 /dev/capi20.07 > crw-rw---- 1 root dialout 68, 9 2005-11-10 10:18 /dev/capi20.08 > crw-rw---- 1 root dialout 68, 10 2005-11-10 10:18 /dev/capi20.09 > crw-rw---- 1 root dialout 68, 11 2005-11-10 10:18 /dev/capi20.10 > crw-rw---- 1 root dialout 68, 12 2005-11-10 10:18 /dev/capi20.11 > crw-rw---- 1 root dialout 68, 13 2005-11-10 10:18 /dev/capi20.12 > crw-rw---- 1 root dialout 68, 14 2005-11-10 10:18 /dev/capi20.13 > crw-rw---- 1 root dialout 68, 15 2005-11-10 10:18 /dev/capi20.14 > crw-rw---- 1 root dialout 68, 16 2005-11-10 10:18 /dev/capi20.15 > crw-rw---- 1 root dialout 68, 17 2005-11-10 10:18 /dev/capi20.16 > crw-rw---- 1 root dialout 68, 18 2005-11-10 10:18 /dev/capi20.17 > crw-rw---- 1 root dialout 68, 19 2005-11-10 10:18 /dev/capi20.18 > crw-rw---- 1 root dialout 68, 20 2005-11-10 10:18 /dev/capi20.19 > > /dev/capi: > total 0 > > > > -----Message d'origine----- > De : Armin Schindler [mailto:[EMAIL PROTECTED] > Envoyé : lundi 14 novembre 2005 18:37 > À : Amaury BOSSE > Cc : [email protected] > Objet : Re: [Asterisk-Users] Fritz card usb v2.1 - Capi installation problem > > If 'capiinfo' does not work, chan_capi will fail too. > > Do you have the node /dev/capi20 with correct permissions? > > Armin > > On Mon, 14 Nov 2005, Amaury BOSSE wrote: > > Hi all, > > > > > > > > I am trying to install an AVM Fritz card USB v2.1 on my Asterisk Box. > > > > I am using Debian Sarge with 2.6.8 kernel. > > > > I have compiled capi last drivers (fcusb2-suse93-3.11-07.tar.gz) and have > > copied fcusb.ko to /lib/modules/2.6.8/extra/. > > > > > > > > All modules seems loaded (capi, capifs, kernelcapi, fcusb,.) > > > > "Capiinfo" fails and returns : "capi not installed - No such device or > > address (6)" > > > > > > > > I have tried to install chan_capi-cm-0.6.1.tar.gz but Asterisk no longer > > starts. > > > > /var/log/asterisk/messages returns : > > > > Nov 14 16:40:51 WARNING[4005]: CAPI not installed, CAPI disabled! > > > > Nov 14 16:40:51 WARNING[4005]: chan_capi.so: load_module failed, returning > > -1 > > > > Nov 14 16:40:51 WARNING[4005]: Loading module chan_capi.so failed! > > > > > > > > I have tried to find out a solution from the web but without results. > > > > Does someone know where the problem is from? > > > > > > > > Thanks for your help > > > > Amaury > > > > > > _______________________________________________ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
