> From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of > Russ Price > Sent: Wednesday, November 16, 2005 2:11 PM > To: Asterisk Users Mailing List - Non-Commercial Discussion > Subject: Re: [Asterisk-Users] Asterisk hobby box > > Funny you would say that - I have a box running with a pair of X100P > clones at the moment. I did have to tinker with transmit and receive > levels, but, since then, they have run just fine on my old 533 MHz > Celeron box, with no echo problems on 1.2.0 beta2 or rc2. I > have them > hooked into the voice mail ports on a Panasonic KX-TA624, and > managed to > integrate it in as a voice mail system. > > The main advantage for the TDM400 is that you can add FXS > ports, or you > could have four FXOs if you needed them. Still, the TDM400's cost is > rather steep for a "hobby" box. > > I wouldn't recommend trying to use more than one X100P card > unless you > can insure they get separate IRQs, and going with more than two would > probably not be a good idea. > > Russ Hi,
I am not surprised you managed to sort out your echo problems quickly and easily. You see, the Panasonic KX-TA624 behaves the same every time, while a PSTN line would have a varying quality, noise, echo every time, depending on the other end sometimes. Yiannis. _______________________________________________ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
