Steven Ringwald wrote:
I apologize if this question has been asked before. Did something
change with the behaviour of the 'sip show inuse' command between
1.0.9 and 1.2-rc1? I used to be able to see a list of extensions and
the number of in/out calls. Now it just reports:
asterisk*CLI> sip show inuse
* User name In use Limit
* Peer name In use Limit
no matter how many calls are being used.
asterisk*CLI> sip show channels
Peer User/ANR Call ID Seq (Tx/Rx) Form Hold
Last Message
192.168.70.128 1234 339ad96826e 00102/00000 ulaw No
Tx: ACK 192.168.70.116 1235 723e1612-52 00101/00002 ulaw
No Rx: ACK 2 active SIP channels
Any info about getting the previous functionality back would be
greatly appreciated.
Steve
I think you have to have call-limit set in sip.conf. I had the same
problem, then set call-limit=10 and 'sip show inuse' worked.
Cheers,
Kevin
_______________________________________________
--Bandwidth and Colocation sponsored by Easynews.com --
Asterisk-Users mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
