From my config on a 4 port card... ;PRI on channel 1 of DS3 #2 group=1 callgroup=1 pickupgroup=1 channel => 1-23 ; ;PRI on channel 3 of DS3 #2 group=2 echocancel=no callgroup=2 pickupgroup=2 channel => 25-47
Use Dial(zap/g1/xxxxxxxxxx) or Dial(zap/g2/xxxxxxxxxx) to pick a PRI good Luck On Nov 16, 2005, at 10:38 AM, Trey Blancher wrote:
I have the TE210p card, with two distinct PRI lines connected to each of the spans. For each span, there are 23 B channels, numbered 1-23, and one D channel, numbered 24. One set of 23 channels is already set up, in group 1 (channels => 1-23 in zapata.conf). How do set up a different group with the new channels? I don't see any way of specifying the spans, or am I supposed to set the new channels up as 25-48, even though my upline provider tells me to set them up as 1-24 (B & D chans)? -- Trey Blancher Systems Administrator, USA Debt Management LLC (251)445-0683 ext 8601 _______________________________________________ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
