On Thu, 2005-11-17 at 12:46 +0000, Victor Alvarez wrote: > Hi, > > I have been trying chan_bluetooth module for asterisk during last > week. I found some difficulties configuring it, due mainly to my > ignorance and secondly to the lack of documentation. Thanks to the > list I have managed to configure the Audio Gateway mode and I have a > strong doubt about how it works. > > This is my scenario: > > sip phone--->sip-Asterisk-bluetooth------>Nokia 6630 & > 7600 ----------->PSTN (My mobile phone) > > I want to make a call from my sip phone to my mobile phone using the > Nokias as intermediaries. I have successfully made calls using both of > them, but I get all the audio on the Nokia when I was expecting it on > my sip phone. > > I am thinking what could be the point for this as the only > functionality I am getting is dialling from the sip phone instead of > from the Nokia, as for the rest, it is nothing but a normal pstn call. > Is it due to a wrong configuration, an uncompleted programming, or Am > I just missing the point? >
Can you try this again with a CLI open on * with a high verbose level. This is what I get when asterisk drops out of the chain. chan_bluetooth.c:701 sco_thread: SCO connection error: Connection refused (errno 111) -- Dave Cotton <[EMAIL PROTECTED]> _______________________________________________ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
