if you are dialing out from zap channel, you can set the caller id with before dialing out and then you can dial like,
exten => Dial(Zap/2/${EXTEN},15)
and if you are ringing an analog phone connected to fxs port, then you can set the caller id before dialing, then you can dial it like,
exten => Dial(Zap/2,15)
Hope this helps.
On 11/19/05, asterisk user dupont <[EMAIL PROTECTED]> wrote:
>asterisk user dupont wrote:
>> Hello.
>>
>> My dial timeout worked perfectly on the last asterisk but not on the new.
>>
>> Here is my extension.conf :
>>
>> exten => s,1,Answer()
>> exten => s,2,noop(${CALLERID})
>> exten => s,3,Set(TIMEOUT(response)=20)
>> exten => s,4,Background(test)
>> exten => s,5,Dial(Zap/2|${CALLERID},15)
>> exten => s,6,GoTo(personnedispo,s,1)
>> exten => s,106,GoTo(tousoccupe,s,1)
>
>Ok problems with the above:
>
>1) exten => s,5,Dial(Zap/2|${CALLERID},15) should not contain the | - that is
>a separator for parameters, so you are setting a timeout of callerid and
>options of 15.
So what do i have to use instead of | ?
As i am not in office today, i can not test.. but it seem curios to write :
exten => s,5,Dial(Zap/2${CALLERID},15)
no ?
I think i must use a separator ?
>
>2) If you would like to have +101 bridging you need to use the j option to the
>dial command now.
>
I didn't know that.
Thank you.
_______________________________________________
--Bandwidth and Colocation sponsored by Easynews.com --
Asterisk-Users mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________ --Bandwidth and Colocation sponsored by Easynews.com --
Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
