|
Hi list, I am testing my ISDN fritz card USB with my Asterisk
box and I have a problem. I can originate calls but I can’t receive them. I have made a DID redirection in order to send
incoming ISDN calls to a SIP phone but capi debug seems to get calls as 2860
instead of 05XXXX2860. You can see a copy of capi debug when I try to
receive a call. Can someone help me to resolve this problem? Thanks Amaury CONNECT_IND ID=001 #0x0d71 LEN=0053 Controller/PLCI/NCCI
= 0x101
CIPValue
= 0x4
CalledPartyNumber
= <81>2860 CallingPartyNumber
= <21 80>870441307
CalledPartySubaddress
= default
CallingPartySubaddress =
default
BC
= <90 90 a3> LLC
= default
HLC
= default
AdditionalInfo
= default -- CONNECT_IND
(PLCI=0x101,DID=2860,CID=870441307,CIP=0x4,CONTROLLER=0x1) > ISDN1:
msn='*' DNID='2860' MSN == ISDN1: Incoming call '0870441307' ->
'2860' INFO_IND ID=001 #0x0d72 LEN=0017 Controller/PLCI/NCCI
= 0x101
InfoNumber
= 0x1e
InfoElement
= <84 81> INFO_RESP ID=001 #0x0d72 LEN=0012
Controller/PLCI/NCCI
= 0x101 -- ISDN1: info element PI 84 81 > ISDN1: Not
end-to-end ISDN INFO_IND ID=001 #0x0d73 LEN=0020 Controller/PLCI/NCCI
= 0x101
InfoNumber
= 0x70
InfoElement
= <81>2860 INFO_RESP ID=001 #0x0d73 LEN=0012
Controller/PLCI/NCCI
= 0x101 -- ISDN1: info element CALLED
PARTY NUMBER > ISDN1:
INFO_IND DID digits not used in this state. INFO_IND ID=001 #0x0d74 LEN=0016 Controller/PLCI/NCCI
= 0x101
InfoNumber
= 0x18
InfoElement
= <89> INFO_RESP ID=001 #0x0d74 LEN=0012
Controller/PLCI/NCCI
= 0x101 -- ISDN1: info element CHANNEL
IDENTIFICATION 89 INFO_IND ID=001 #0x0d75 LEN=0016 Controller/PLCI/NCCI
= 0x101
InfoNumber
= 0xa1
InfoElement
= <a1> INFO_RESP ID=001 #0x0d75 LEN=0012
Controller/PLCI/NCCI
= 0x101 -- ISDN1: info element Sending
Complete CONNECT_RESP ID=001 #0x0d75 LEN=0032 Controller/PLCI/NCCI
= 0x101
Reject
= 0x1
BProtocol
B1protocol =
0x0
B2protocol
= 0x0 B3protocol
= 0x0
B1configuration
= default
B2configuration
= default
B3configuration
= default ConnectedNumber =
default ConnectedSubaddress
= default
LLC
= default
AdditionalInfo
BChannelinformation
= default Keypadfacility
= default
Useruserdata =
default
Facilitydataarray
= default DISCONNECT_IND ID=001 #0x0d76 LEN=0014 Controller/PLCI/NCCI
= 0x101
Reason
= 0x0 DISCONNECT_RESP ID=001 #0x0d76 LEN=0012 Controller/PLCI/NCCI
= 0x101 == ISDN1: CAPI Hangingup == ISDN1: Interface cleanup PLCI=0x101 |
_______________________________________________ --Bandwidth and Colocation sponsored by Easynews.com --
Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
