I'm fairly new to asterisk. I have read about the problems about NAT, But can't seem to find a solution.
My Asterisk is on a public domain, there is no NAT or firewall in front of the asteris box. I have sucessfully connected iax2 softphones & was able to recieve & make calls. In the same locations where I have the iax2 extensions working I have set up a a SIP softphone & a SIP ATA (Sipura2002). Both teh sip phones are able to register. I can also make & recieve calls but cannot hear anything after the call is answered at both ends. I'm not sure what is causing this problem. By the way I'm using SME server 7(centos 4.2) with [EMAIL PROTECTED] installed.
my Sip.conf :
[2008] ;(Sipura2002)
username=2008
type=friend
secret=2008
record_out=Adhoc
record_in=Adhoc
qualify=no
port=5060
nat=1
[EMAIL PROTECTED]
host=dynamic
dtmfmode=rfc2833
context=from-internal
canreinvite=no
callerid=device <2008>
[2009] ;X-Lite Soft Phone
username=2009
type=friend
secret=2009
record_out=Adhoc
record_in=Adhoc
qualify=no
port=5060
nat=1
[EMAIL PROTECTED]
host=dynamic
dtmfmode=rfc2833
context=from-internal
canreinvite=no
callerid=device <2009>
Thanks in advance..
_______________________________________________ --Bandwidth and Colocation sponsored by Easynews.com --
Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
