The problem is not the module though its on the port its plugged into. I can move the module to another port and it works fine, so I was thinking it is the board. I guess I will call Digium and see what they say.
thanks On 11/22/05, Rich Adamson <[EMAIL PROTECTED]> wrote: > > > I have a TDM400 REV I Ver 1 board and am having an issue with 1 of the > > 4 FXO channels. FXO 1 always has clicks, pops and echo but the others > > are crystal clear all of the time. The card is on its own IRQ zztest > > shows 100% to 99.98% and is getting 1000 int per second. Its not > > dropping interrupts either. > > > > I ran FXOTUNE and it did nothing to fix the issue > > > > It only is happening on FXO port 1 > > > > Anything else to try? > > Sure... call digium support. They'll probably rma the module. > > > -- Tom Vile Baldwin Technology Solutions, Inc Consulting - Web Design - VoIP Telephony www.baldwintechsolutions.com Phone: 518-631-2855 x205 Phone: 978-203-3848 x205 Fax: 518-631-2856 _______________________________________________ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
