You need to enable transfer: Dial Dialing Application - Place an call and connect to the current channel Dial(Technology/resource[&Technology2/resource2...][|timeout][|options][ |URL]): Requests one or more channels and places specified outgoing calls on them. As soon as a channel answers, the Dial app will answer the originating channel (if it needs to be answered) and will bridge a call with the channel which first answered. All other calls placed by the Dial app will be hunp up If a timeout is not specified, the Dial application will wait indefinitely until either one of the called channels answers, the user hangs up, or all channels return busy or error. In general, the dialler will return 0 if it was unable to place the call, or the timeout expired. However, if all channels were busy, and there exists an extension with priority n+101 (where n is the priority of the dialler instance), then it will be the next executed extension (this allows you to setup different behavior on busy from no-answer). This application returns -1 if the originating channel hangs up, or if the call is bridged and either of the parties in the bridge terminate the call. The option string may contain zero or more of the following characters: ***'t' -- allow the called user transfer the calling user*** OR
***'T' -- to allow the calling user to transfer the call.*** 'r' -- indicate ringing to the calling party, pass no audio until answered. 'm' -- provide hold music to the calling party until answered. 'd' -- data-quality (modem) call (minimum delay). 'c' -- clear-channel data call (PRI-PRI only). 'H' -- allow caller to hang up by hitting *. 'C' -- reset call detail record for this call. 'P[(x)]' -- privacy mode, using 'x' as database if provided. In addition to transferring the call, a call may be parked and then picked up by another user. The optionnal URL will be sent to the called party if the channel supports it. > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:asterisk-users- > [EMAIL PROTECTED] On Behalf Of Juan J. Sierralta P. > Sent: Tuesday, October 07, 2003 6:46 PM > To: [EMAIL PROTECTED] > Subject: RE: [Asterisk-Users] Call park on SIP phones > > On Tue, 2003-10-07 at 18:23, Andrew Joakimsen wrote: > > How are you transfering to 700? You dial # while in a call and then it > > says "transfer" and you then dial 700, or are you using a different > > method? > > If I dial # while in a call nothing happens. I was transfering using > the 7960 transfer function which gives me a dial tone and then I dial > 700 which gives me a busy tone I also tried to dial #700 but as soon as > you push # on a 7960 it dials since # its used to signal the end of the > dial string. > > > > > > > I still cannot park calls on my 7960, I have: > > > > > > ----- extensions.conf ------- > > > [demo] > > > ; Juanjo > > > exten => 8991,1,Dial(SIP/8991,20)|t > > > exten => 8991,2,Voicemail2([EMAIL PROTECTED]) > > > exten => 8991,102,Voicemail2([EMAIL PROTECTED]) > > > exten => 8991,103,Hangup > > > > > > [local] > > > ; > > > ; Master context for local, toll-free, and iaxtel calls only > > > ; > > > ignorepat => 9 > > > include => default > > > include => parkedcalls > > > include => trunklocal > > > include => cell > > > include => iaxtel700 > > > include => trunktollfree > > > include => iaxprovider > > > > > > ------ parking.conf ----------- > > > > > > [general] > > > parkext => 700 ; What ext. to dial to park > > > parkpos => 701-720 ; What extensions to park calls on > > > context => parkedcalls ; Which context parked calls are in > > > > > > ----- sip.conf ---------------- > > > [8991] > > > type=friend > > > username=8991 > > > secret=secret > > > nat=no ; This phone may be natted > > > host=dynamic > > > canreinvite=no ; Cisco poops on reinvite sometimes > > > qualify=500 ; Qualify peer is no more than 200ms > > > context=local > > > [EMAIL PROTECTED] > > > > > > > > > > > > If I dial 700 I got busy tone (440 Not Found) the same happens > > if I > > > dial #700 which I had to configure in dialplan.xml of the phone > > > (rewriting 700 as #700). > > > > > > Any suggestions ? > > > > > > -- > > > Juanjo sin .sig > > > > > > _______________________________________________ > > > Asterisk-Users mailing list > > > [EMAIL PROTECTED] > > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > > _______________________________________________ > > Asterisk-Users mailing list > > [EMAIL PROTECTED] > > http://lists.digium.com/mailman/listinfo/asterisk-users > -- > Juanjo sin .sig > > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
