What firmware version did you use for the polycom phone ?? I just tried it on my IP600, and when I press the park button, it waits for me to dial an extension number, then I press park again, and it just hangs up the call.
Thanks, Adam On Tue, 2005-11-22 at 13:56 -0800, Anthony Rodgers wrote: > Hi there, > > Instead of asking a question, I thought I'd post an answer. I got the > Polycom IP501 'Park' softkey working with * by doing the following: > > features.conf: > > [general] > parkext => 1000 > parkpos => 1001-1009 > context => parkedcalls > parkingtime => 120 > transferdigittimeout => 3 > courtesytone = beep > > Nothing unusual there. Here's the neat bit: > > extensions.conf: > > [internal] ; or whatever the relevant context is for you - it's usually > wherever your Polycom lives > include => parkedcalls > exten => > callpark,1,ParkAndAnnounce(pbx-transfer:PARKED|120|SIP/ > ${DIALEDPEERNUMBER}|internal,${DIALEDPEERNUMBER},1) > > By using SIP DEBUG, I discovered that the Polycom attempts to re-invite > the call to an extension called callpark. I couldn't get Park() to work > (it announces the stall number to the parked caller, instead of the > parker, for some reason), but using ParkAndAnnouce puts the parked call > on hold, hangs up the parker and then immediately calls them back with > an announcement of the stall number. > > Hope this helps someone out...... > > Regards, _______________________________________________ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users