On Wed, November 23, 2005 20:29, Francesco Peeters said: > On Wed, November 23, 2005 11:17, Francesco Peeters said: <SNIP> > > Just a question: Does the card require a device connected to it to start > up in NT mode? I have been testing so far, so I have not yet connected my > phone to the card with a cross-cable because I did not want to lose normal > telephone access... >
Just made myself a crossed NT1 connection to the NT mode card (as described on the PBX4linux site) and connected my phone. The zaphfc driver shows that layer 1 is activated (G3) once the phone is connected, but that is where it stops, as anything above that should be handled in chan_zap. However when I leave the card in bri_cpe_ptmp in zapata.conf, the layer2+ protocols are not correct (TE mode) and when I put in bri_net_ptmp, the chan_zap somehow doesn't complete loading or exits in an unexpected manner, resulting in a situation where Asterisk stops loading it's configs, and thus runs without a dialplan and other modules... Seems to me there's an issue in that area: chan_zap, maybe libpri, etc. -- Francesco Peeters ---- GPG Key = AA69 E7C6 1D8A F148 160C D5C4 9943 6E38 D5E3 7704 If your program doesn't recognize my signature, please visit http://www.CAcert.org/index.php?id=3 to retrieve the Root CA certificate. _______________________________________________ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
