You can also try busydetect=yes, busycount=4 in zapata.conf.
;
; On trunk interfaces (FXS) and E&M interfaces (E&M, Wink, Feature Group D
; etc, it can be useful to perform busy detection either in an effort to
; detect hangup or for detecting busies
;
busydetect=yes
;
; On trunk interfaces (FXS) it can be useful to attempt to follow the progress
; of a call through RINGING, BUSY, and ANSWERING. If turned on, call
; progress attempts to determine answer, busy, and ringing on phone lines.
; This feature is HIGHLY EXPERIMENTAL and can easily detect false answers,
; so don't count on it being very accurate. Also, it is ONLY configured for
; standard U.S. tones
;
busycount=4
; On trunk interfaces (FXS) and E&M interfaces (E&M, Wink, Feature Group D
; etc, it can be useful to perform busy detection either in an effort to
; detect hangup or for detecting busies
;
busydetect=yes
;
; On trunk interfaces (FXS) it can be useful to attempt to follow the progress
; of a call through RINGING, BUSY, and ANSWERING. If turned on, call
; progress attempts to determine answer, busy, and ringing on phone lines.
; This feature is HIGHLY EXPERIMENTAL and can easily detect false answers,
; so don't count on it being very accurate. Also, it is ONLY configured for
; standard U.S. tones
;
busycount=4
regards,
Umair bari
On 11/24/05, Faris Raouf <[EMAIL PROTECTED]> wrote:
[EMAIL PROTECTED] wrote:
> Hello everybody :-)
>
> This are my first line french zapata.conf settings.
> I have 3 like this, with only rx/tx gain a little bit different levels.
> Running well.
> Best Regards,
> Francois BERGERET,
> France.
>
> usecallerid=yes
> hidecallerid=no
> usecallingpres=yes
> callwaitingcallerid=yes
> threewaycalling=yes
> transfer=yes
> canpark=yes
> cancallforward=yes
> callreturn=yes
> echocancel=yes
> echocancelwhenbridged=yes
> echotraining=yes
> rxgain=2
> txgain=6
> group=1
> callgroup=1
> pickupgroup=1
> immediate=no
> busydetect=yes
> busycount=3
> busypattern=500,500
> signalling = fxs_ks
> channel => 1
>
> -----Message d'origine-----
> De : [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED]] De la part de asterisk user
> dupont
> Envoyé : vendredi 18 novembre 2005 13:33
> À : asterisk-users@lists.digium.com
> Objet : [Asterisk-Users] In France asterisk never detect hang up. Why ?
>
>
> Hello.
>
> I am sorry my english is not good at all.
>
> When i have a call from a fxo port of a tdm400p, asterisk waits one minute
> before detecting that the caller has hang up his phone.
>
> I have in my extension conf :
> answer
> background (the prompt is 40 second long)
> dial (on fxs port) confgured for 30 seconds ringing.
>
> if the caller hang up at the begining of the background prompt, asterisk
> waits until he make ring the phone on the dial command for the all 30
> secondes before detecting the hang up.
>
> Do you know if there is a way to repair that ?
>
> here is what i see on asterisk when the caller hang up IMMEDITALY after the
> test prompt begins :
>
> *CLI> -- Starting simple switch on 'Zap/4-1'
> -- Executing Answer("Zap/4-1", "") in new stack
> -- Executing NoOp("Zap/4-1", "0675458745") in new stack
> -- Executing Set("Zap/4-1", "TIMEOUT(response)=20") in new stack
> -- Response timeout set to 20
> -- Executing BackGround("Zap/4-1", "barge") in new stack
> -- Playing 'test' (language 'fr')
> -- Executing Dial("Zap/4-1", "Zap/2|0675458745|30") in new stack
> -- Called 2
> -- Zap/2-1 is ringing
> -- Zap/2-1 is ringing
> -- Zap/2-1 is ringing
> -- Zap/2-1 is ringing
> -- Zap/2-1 answered Zap/4-1
> -- Attempting native bridge of Zap/4-1 and Zap/2-1
> -- Hungup 'Zap/2-1'
> == Spawn extension (reseau, s, 5) exited non-zero on 'Zap/4-1'
> -- Executing Hangup("Zap/4-1", "") in new stack
> == Spawn extension (reseau, h, 1) exited non-zero on 'Zap/4-1'
> -- Hungup 'Zap/4-1'
>
>
> In my zapata.conf i have :
>
> language=fr
> default=fr
> relaxdtmf=yes
> echocancelwhenbridged=yes
> rxgain=0.0
> txgain=0.0
> cidsignalling=v23
> usecallerid=yes
> group => 1
> context=reseau
> signalling=fxs_ks
> callprogress=yes
> busydetect=yes
> callerid=asreceived
> busycount=5
> pulse=yes
>
> In my zaptel.conf i have :
>
> loadzone=fr
> defaultzone=fr
> fxoks=1-3
> fxsks=4
>
>
> If anyone can see what is wrong he will really help me.
>
> thank you.
Your English is better than my French :-)
Making the TDM400p detect hangups can be hard. I had it working OK with
pre-1.2 versions, but now in 1.2 stable I'm also having some problems
again. I'll investigate in more details eventually.
For now, the only thing I can suggest is that you add:
hanguponpolarityswitch=yes
in your zapata.conf
In the UK, hangups are signaled by a polarity switch, and since
sometimes the UK and Europe do the same thing, I'm hoping this will be
the case for you too.
However, even with this option enabled, like I say, I'm having some
small problems with 1.2 stable. I hope to have time this weekend to
investigate and see what is going on.
Faris.
_______________________________________________
--Bandwidth and Colocation sponsored by Easynews.com --
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________ --Bandwidth and Colocation sponsored by Easynews.com --
Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
