The problem is your's. pre21 works with Asterisk 1.2, although I haven't
yet updated the Makefile patch to apply cleanly. Try looking for other
versions of spandsp left behind on your system.
Steve
John Covici wrote:
I am getting the same problems -- undefined symbols with
spandsp-0.0.2pre21 and the fax modules from the same directory --
wonder if there are anylater versions? I am not using /usr/local/lib
for any of these so its not in the ld.so.conf.
Any assistance would be appreciated.
on Wed, 23 Nov 2005 07:50:54 -0600 Martinez Felix <[EMAIL PROTECTED]> wrote:
two things...verify the content of your /etc/ld.so.conf file must have the
path included(/usr/local/lib) and recompile and install...first span and
then asterisk...
On 11/22/05, Dominik Simon <[EMAIL PROTECTED]> wrote:
Hi all,
today I installed asterisk 1.2stable and than spandsp-0.0.2pre21 with
rxfax & txfax. After I restart the asterisk and get the following
errors:
[app_rxfax.so] WARNING[6340]: loader.c:325 __load_resource: /usr/lib/
asterisk/modules/app_rxfax.so: undefined symbol: fax_set_phase_d_handler
WARNING[6340]: loader.c:554 load_modules: Loading module app_rxfax.so
failed!
[app_txfax.so] WARNING[6311]: loader.c:325 __load_resource: /usr/lib/
asterisk/modules/app_txfax.so: undefined symbol: fax_set_header_info
WARNING[6311]: loader.c:554 load_modules: Loading module app_txfax.so
failed!
I am running Asterisk on fedora core 4 - all works great (Asterisk,
app_conference and others...), but tx/rxfax failed :(
Now I found the following message on http://www.asteriskguru.com/
tutorials/spandsp.html:
// START //
2) If you receive a message like the following:
[app_txfax.so]Oct 5 12:05:24 WARNING[14665]: loader.c:314
__load_resource: /usr/lib/asterisk/modules/app_txfax.so: undefined
symbol: fax_set_header_info
Oct 5 12:05:24 WARNING[14665]: loader.c:543 load_modules: Loading
module app_txfax.so failed!
Ouch ... error while writing audio data: : Broken pipe
When you execute the asterisk -vvvvvvvc command and the Asterisk
crashes when you try to execute the safe_asterisk command, then very
probably you have the following problem:
The previously installed version of spandsp has been 0.0.3, but now
you have installed version 0.0.2. The problem is that the
installation of version 0.0.3 creates a symlink, which is not
replaced by installation of version 0.0.2. So the symlink points to
the library of version 0.0.3, which actually does not exist.
The solution is to find the location of this symlink and to delete it
manually. Usually it is in the /usr/lib/ directory.
/// STOP ///
-
But I only have spandsl-0.0.2 installed, and the libs are in /usr/
local/lib, see:
-rw-r--r-- 1 root root 946280 18. Nov 22:02 libspandsp.a
-rwxr-xr-x 1 root root 822 18. Nov 22:02 libspandsp.la
lrwxrwxrwx 1 root root 19 18. Nov 22:02 libspandsp.so ->
libspandsp.so.0.0.1
lrwxrwxrwx 1 root root 19 18. Nov 22:02 libspandsp.so.0 ->
libspandsp.so.0.0.1
-rwxr-xr-x 1 root root 738959 18. Nov 22:02 libspandsp.so.0.0.1
-
Does anybody have the same problems?
Best regards and thx for help!
Dominik Simon.
_______________________________________________
--Bandwidth and Colocation sponsored by Easynews.com --
Asterisk-Users mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
--Bandwidth and Colocation sponsored by Easynews.com --
Asterisk-Users mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
