Bukoka Budoka wrote:
Hi to all,
when i issue the ztcfg command for the first time i get the message
"Changing signalling on channel 1 from Unused to FXS Kewlstart".
When i issue it for the second time i get the normal message "1
channels configured."
Has anyone any ideas of why not to have the normal behavior on the
first place (i mean without passing from "Unused to FXS Kewlstart" and
then to "1 channels configured." ???
-------------------------------------------------------
[EMAIL PROTECTED] ~]# ztcfg -vvv
Zaptel Configuration
======================
Channel map:
Channel 01: FXS Kewlstart (Default) (Slaves: 01)
1 channels configured.
Changing signalling on channel 1 from Unused to FXS Kewlstart
[EMAIL PROTECTED] ~]# ztcfg -vvv
Zaptel Configuration
======================
Channel map:
Channel 01: FXS Kewlstart (Default) (Slaves: 01)
1 channels configured.
My Zaptel is as follows:
fxsks=1
loadzone=us
defaultzone=us
--------------------------------------------------
My zapata is as follows:
[channels]
context=outgoing
;switchtype=national
signalling=fxs_ks
;rxwink=300 ; Atlas seems to use long (250ms) winks
;flash=10000
usecallerid=no
hidecallerid=yes
callwaiting=no
usecallingpres=no
callwaitingcallerid=no
threewaycalling=no
transfer=no
cancallforward=no
callreturn=no
echocancel=yes
echotraining=yes
echocancelwhenbridged=yes
rxgain=3.0
txgain=-1.0
group=1
callgroup=1
pickupgroup=1
immediate=yes
cidsignalling=bell
channel => 1
The zaptel driver as well as the wcfxo driver is loaded in rc.local:
modprobe zaptel
modprobe wcfxo
/sbin/ztcfg -vvvvv
/usr/sbin/asterisk -vvv &> /var/log/asterisk/status-log &
thank you all,
Budoka.
_________________________________________________________________
Don't just search. Find. Check out the new MSN Search!
http://search.msn.com/
_______________________________________________
--Bandwidth and Colocation sponsored by Easynews.com --
Asterisk-Users mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
If you run ztcfg first time after a new configuration, it will show
first screen, specially when you change signalling configs. Afterward
ztcfg will show second, until you make change. :D
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
