Pretty sure.... zapata.conf
immediate=yes should do it for incomming calls and you won't have CID. Brett On 11/29/2005, "[EMAIL PROTECTED]" <[EMAIL PROTECTED]> wrote: >Hi out there, > >Im looking for support in regards to configuration of ZAP interface on a >TDM400P card (TDM04D).Im running Asterisk v 1.0.7 cvs on White Box 3.5 with >kernael 2.4.21 >Ive got two problems with Asterisk: >1. When there is an incoming phone call on the zap interface, Asterisk holds >call for about three rings and then forward it to a predefined extension. I >assuming that it waits for caller id, therefore Ive tried to switch it off >by modification of callerid and usecallerid with no positive outcome. > >My zapata.conf is: >[channels] >language=en >immediate=no >busydetect=yes ; to test when a line is hung-up >busycount=6 ; to prevent suprious hangups >context=from-pstn >signalling=fxs_ks >usecallerid=no >callerid= asreceived ;(no or any other value doesnt bring any >improvement >to my setup) >echocancel=yes >echotraining=800 >callprogress=yes >group=0 >channel=>1-4 _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
