Re: [Asterisk-Users] Reboot stops TD400P cards from outgoing calls until first incoming call arrives

[James MacLean]

James B. MacLean wrote:

Rich Adamson wrote:

------------------------
 From: "James B. MacLean" <[EMAIL PROTECTED]>

Asterisk*CLI> zap show status


---------------End of Original Message-----------------

The above does indicate a problem.  The Rev E/F card is known to have
issues, and most of the issues revolved around unusual failures after
a week or so. But there have been several other changes leading up to


I don't know of anyone that has attempted to mix to Rev's of the TDM
card in a system, so unknown whether that might be an issue or not.

I'd contact digium support and have that Rev E/F card rma'ed under
warranty. (All TDM cards are still under warranty.)

Description Alarms IRQ bpviol CRC4 Wildcard TDM400P REV E/F Board 1 OK 0 0 0 Wildcard TDM400P REV I Board 2 OK 0 0 0 the Rev I card (the latest is Rev J with only minor changes since Rev I).

Thanks for the heads up. More dissappointing is that the E/F card is the newer card purchased. Where can I go to see when certain revisions were released? Surprising that the newer card just purchased (to me) is the older rev :(.

thanks again,
JES

Next I'll try with just one card, but that will be another day as the machine is not local.

JES

begin:vcard
fn:James B MacLean
n:MacLean;James B
org:Education;ITS Technical Services
adr:;;;Halifax;NS;;Canada
email;internet:[EMAIL PROTECTED]
url:http://www.ednet.ns.ca/~macleajb
version:2.1
end:vcard

Booting with only one card did _not_ work. Tried each separately. Plugged into phone lines and not plugged into phone lines. I had expected at least that my Rev I card should have worked :(.

smime.p7s
Description: S/MIME Cryptographic Signature

_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --

Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users