2005/11/29, Francesco Peeters <[EMAIL PROTECTED]>: > Then add to a startup file like rc.local: > modprobe zaptel > modprobe zaphfc > ztcfg -vv > > to start and initialize the cards...
I'll try... when somebody goes to reset the machine. I'm configuring it through ssh and it hanged when I was trying zaphfc module. The lastest problems I had where asterisk didn't start. The error was it could'nt access the device. Lastest problems I had (after reinstalling asteriskathome and removing some modules) where like "ZT_SPANCONFIG failed on span 1: Invalid argument (22)" in this case: [EMAIL PROTECTED] zaphfc]# ztcfg -v Zaptel Configuration ====================== SPAN 1: CCS/ AMI Build-out: 399-533 feet (DSX-1) Channel map: Channel 01: Clear channel (Default) (Slaves: 01) Channel 02: Clear channel (Default) (Slaves: 02) Channel 03: D-channel (Default) (Slaves: 03) 3 channels configured. ZT_SPANCONFIG failed on span 1: Invalid argument (22) And trying to start asterisk I received this errors: Nov 29 14:14:25 WARNING[4240] chan_zap.c: Unable to specify channel 1: Device or resource busy Nov 29 14:14:25 ERROR[4240] chan_zap.c: Unable to open channel 1: Device or resource busy here = 0, tmp->channel = 1, channel = 1 Nov 29 14:14:25 ERROR[4240] chan_zap.c: Unable to register channel '1-2' Nov 29 14:14:25 WARNING[4240] loader.c: chan_zap.so: load_module failed, returning -1 Nov 29 14:14:25 WARNING[4240] loader.c: Loading module chan_zap.so failed! Ahd ztcfg -- Alejandro Vargas _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
