Im having problems setting up a trunk between two locations. Heres the setup I have:
Server A is connected to the PSTN at my datacenter Server B is connected to a clients e1 line at his datacenter
I only want to route calls from Server B to Server A and out through the PSTN. Server A has a lot of other things connecting to it, so I need a very specific context for all calls to go through. Because of the volume of calls between the two servers I wish to setup a trunk.
Server A has this entry in iax.conf
[serverb] type=friend host=serverbipaddress trunk=yes auth=md5,plaintext,rsa secret=s3rv3rb username=serverb context=serverb qualify=yes
Server B doesnt have much in iax.conf - only codec and port information under [general]
Server B is using this in his extensions.conf though:
exten => _X.,1,Dial,IAX2/serverb:[EMAIL PROTECTED]/${EXTEN}|180
now i know some things are wrong, i know i can use type=peer because its only a one way connection (im not making calls to serverb, only recieving calls from it)
but when i do an iax2 trunk debug i get this:
IAX2 Trunk Debug Requested Beginning trunk processing Processed trunk peer 'serverb' (0.0.0.0:0) with 0 call(s) Ending trunk processing with 1 peers and 0 calls processed
even though there are calls going between the servers - so obviously they arent using the trunking facility. so whats the deal. what do i have to do in iax.conf on both sides and in extensions.conf on the side of ServerB
ok, bad form to reply to my own posting, but in case anyone else has this problem in future it was a very silly setting. on server b i didnt need the entry in iax.conf - all i needed was a register statement.
duncan
_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
