On Mon, 2005-12-05 at 11:27 -0500, Robert La Ferla wrote: > Pete Barnwell wrote: > > I wasted a lot of time getting 9112is to work with almost identical > > setup. The problem I eventually found was that the 9112is look for the > > config file mymacaddress.cfg in upper case (eg 00085D035BC1.cfg) whereas > > the documentation says they look for lower case, so they were ignoring > > my tftp settings. The 9133i may well be the same. > > > > The other thing I had to do was to provide the line > > > > next-server <tftpserver ip>; > > > > in dhcpd.conf to get them to pick everything up. (IIRC that last bit was > > only to do with time&date format though). > > > > I read about the mac address case sensitivity so I used an all uppercase > filename which works fine. The downloading of the firmware works fine > too. I also have the ntp time/date working. I just can't get Asterisk > to respond to the phone! Help!
One thing is to do a factory reset to reinit everything, I did that with my 9112i after upgrading the firmware. -- Dave Cotton <[EMAIL PROTECTED]> _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
