Well... not so perfectly.
What I'm experiencing is that during certain call volumes, many calls
go thru from box1 to box2. However, there are some cases where I get
this message:
Dec 6 11:11:19 WARNING[203]: chan_sip.c:9525 handle_response_invite:
Forbidden - wrong password on authentication for INVITE to
'"5095551212" <sip:[EMAIL PROTECTED]>;tag=as3e387d65'
and the caller gets busy signal. However, other callers calling the
same number get thru with no problems. Why is this?
Thanks,
Waldo
On Dec 5, 2005, at 10:30 AM, Waldo Rubinstein wrote:
This worked perfectly.
Thanks,
Waldo
On Dec 5, 2005, at 4:32 AM, xcel wrote:
Try this
___________________________________
1st Machine sip.conf
[box2]
username=box1
type=friend
host=10.0.0.2
secret=*****
in extensions.conf
exten => _XXXXXX,1,Dial(SIP/box2/${EXTEN})
__________________________________
2nd Machine sip.conf
[box1]
username=box2
type=friend
host=10.0.0.1
secret=*****
in extensions.conf
exten => _XXXXX,1,Dial(SIP/box1/${EXTEN})
--xce
*********** REPLY SEPARATOR ***********
On 12/5/2005 at 12:11 AM Waldo Rubinstein wrote:
I have 2 Asterisk servers running 1.2.0. One of them is a PSTN
gateway. Currently they are connected using IAX2. I wanted to play
with SIP.
I setup a sip entry (type=friend) in the PSTN gateway box and a sip
entry (type=user) in the second box in order to send calls using SIP
to the second box. This works fine. However, when I setup the second
box as type=friend in order for it to be able to send calls back to
the gateway box, then calls no longer work from gateway box to the
second box. The reported error is:
Dec 5 00:07:14 NOTICE[203]: chan_sip.c:9514 handle_response_invite:
Failed to authenticate on INVITE to '"2125551212" <sip:
[EMAIL PROTECTED]>;tag=as0698b1b9'
In the gateway box, my sip.conf looks like this:
[general]
allowguest=yes
autocreatepeer=no
[secondbox]
type=friend
host=10.0.0.2
secret=mysecret
In the second box, my sip.conf looks like this:
[general]
allowguest=yes
autocreatepeer=no
[secondbox]
type=user
host=10.0.0.1
secret=mysecret
Any ideas on how to correctly set this up?
Thanks,
Waldo
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
