Add this to your phone1.cfg:
<msg msg.bypassInstantMessage="1">
<mwi msg.mwi.1.subscribe="" msg.mwi.1.callBackMode="contact" msg.mwi.1.callBack="*98805"
msg.mwi.2.subscribe="" msg.mwi.2.callBackMode="disabled" msg.mwi.2.callBack=""
msg.mwi.3.subscribe="" msg.mwi.3.callBackMode="disabled" msg.mwi.3.callBack=""
msg.mwi.4.subscribe="" msg.mwi.4.callBackMode="disabled" msg.mwi.4.callBack=""
msg.mwi.5.subscribe="" msg.mwi.5.callBackMode="disabled" msg.mwi.5.callBack=""
msg.mwi.6.subscribe="" msg.mwi.6.callBackMode="disabled" msg.mwi.6.callBack=""
My extension is 805 so you will be sending *98805 to get to your voicemail from there you may need to enter your password or not ...:)
Works like a charm ..
robert
I mistakenly followed a how to guide on voip-info.org describing how to setup the 501s with [EMAIL PROTECTED] It appears that you have set me on the right track as setting the contact set to *98 brings up the voicemailmain. The next logical question is - How do I setup the contact to enter the mailbox number and password when prompted. I would assume that this can be scripted but I am a noob when it comes to asterisk. thanks for all the help so far.
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Brent Bloodworth
Sent: Tuesday, December 06, 2005 11:30 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] Messages button on a Polycom 501
On 12/6/05, Eric ManxPower Wieling <[EMAIL PROTECTED]> wrote:You have the contact set to the extension, you need the contact set to
whatever you dial to retrieve your voicemail. i.e. the one that runs
voicemailmain.
Brent Bloodworth wrote:
> Actually I think that is how it is setup now. I configured the phone
> through the web interface. Callback mode is set to "contact" and the
> Callback contact is set to the extension.
>
> On 12/5/05, *Jerry Jones* <[EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]>>
> wrote:
>
> I assume you wish to have the button retrieve your vm - if so then
>
> time to edit your config file, or use web interface.
>
> msg.mwi.1.subscribe="" msg.mwi.1.callBackMode="contact" msg.mwi.
> 1.callBack="xxx"
> xxx=extension to dial to retrieve vm
>
> On Dec 5, 2005, at 5:38 PM, Brent Bloodworth wrote:
>
> > Need a little help. Just set up an [EMAIL PROTECTED] box with 5 Polycom
> > 501 phones. Everything works great except the messages button which
> > when pressed results in asterisk responding "Person at extension
> > 102 is on the phone. Please leave a message after the tone. I have
> > searched the web and several of the the asterisk mailing list
> > archive pages - but I haven't had any luck. Anyone have a suggestion?
> > _______________________________________________
> > --Bandwidth and Colocation provided by Easynews.com
> <http://Easynews.com > --
> >
> > Asterisk-Users mailing list
> > To UNSUBSCRIBE or update options visit:
> > http://lists.digium.com/mailman/listinfo/asterisk-users
> <http://lists.digium.com/mailman/listinfo/asterisk-users>
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com
> <http://Easynews.com> --
>
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________ --Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
