E1 PRI has only one D channel and it is correctly defined as channel 16 in this config. You probably just need a T1/E1 crossover between asterisk and the PBX. Just cross pin one with four and two with five. I have even cut a cat5 cable, stripped the wires and crossed the pins appropriately and taped it up with electrical tape when in a pinch or just for testing. Obviously you will want to make a real crossover once you determine this is what you need.
The above is assuming that your PBX is configured with E1 PRI CCS HDB3 Thanks, Steve > > If I remember correctly an E1 has two D-Channels. Check your notes on > what channels 31, 32 really do..... > > On 12/7/05, Laszlo Megyer <[EMAIL PROTECTED]> wrote: > > Hey folks, > > > > I have my linuxbox connected to a PBX through a digium te110p card, E1 > line. > > The asterisk is set up to be the timing master for the line. > > > > recently run into the following error message when starting asterisk: > > > > The message: > > --------- > > == Primary D-Channel on span 1 down > > Dec 7 11:34:02 WARNING[1105]: chan_zap.c:2282 pri_find_dchan: No > > D-channels available! Using Primary channel 16 as D-channel anyway! > > == Primary D-Channel on span 1 up > > > > Also the yellow alarm is not cleared on the PBX side. Any > > recommendations for the problem? > > > > > > Or should I use Tie-line connection between the PBX and asterisk > somehow? > > > > thanks, > > lez > > > > config files follow: > > > > > > > > my /etc/zaptel.conf: > > -------------------8<----------- > > span=1,0,0,ccs,hdb3 > > bchan=1-15,17-31 > > dchan=16 > > > > my /etc/asterisk/zapata.conf: > > ----------------8<------------------- > > [trunkgroups] > > > > [channels] > > > > spanmap => 1,1,1 > > > > usecallerid=yes > > hidecallerid=no > > language=en > > callwaiting=no > > threewaycalling=yes > > transfer=yes > > echocancel=yes > > echotraining=yes > > callreturn=yes > > > > rxgain=0.0 > > txgain=0.0 > > > > callgroup=1 > > pickupgroup=1 > > > > immediate=no > > > > > > ; LOCAL CONFIGS: > > context = internal > > > > signalling = pri_net > > group = 1; > > channel => 1-15,17-31 > > > > switchtype = national > > _______________________________________________ > > --Bandwidth and Colocation provided by Easynews.com -- > > > > Asterisk-Users mailing list > > To UNSUBSCRIBE or update options visit: > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > > > -- > --- > Andrew Latham - AKA: LATHAMA (lay-th-ham-eh) > [EMAIL PROTECTED] - [EMAIL PROTECTED] - [EMAIL PROTECTED] > If any of the above are down we have bigger problems than my email! > --- > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com -- > > Asterisk-Users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
