Jerry Geis wrote:
Jason,
I added:
nat=never
qualify=no
and I still cant get a UIP200 to ring when calling it after using 1.2?
Any other suggestions?
Well, we're using UIP200's (BS 4.63 firmware) with 1.2. There is a bug
(5780) re: rfc2833 & g729 in 1.2 tarball but that doesn't seem to be the
case here.
Is the phone registering? "sip show peers"
If yes, turn on "sip debug" and look for clues. Also look in the
Asterisk log file (set in logger.conf). i.e. /var/log/asterisk/full
Hope this helps.
Regards,
Jason
Thanks,
Jerry
Jerry Geis wrote:
/ I have a handful of phones that work with 1.0.9. I was trying to
upgrade
/>/ to 1.2
/>/ and the UIP200 phones dont ring.
/>/ />/ below is my config for 1 phone.
/>/ />/ I tried it with and without the qualify=yes or qualify=no and
did not />/ seem to make
/>/ a difference. still no ring.
/>/ />/ Any ideas on what might be the issue?
/>/ />/ THanks,
/>/ />/ Jerry
/>/ --------
/>/ />/ ; Jerry Phone
/>/ [528]
/>/ type=friend
/>/ dtmfmode=rfc2833 ; Choices are inband, rfc2833, or info
/>/ username=something
/>/ secret=something
/>/ disallow=all
/>/ allow=ulaw
/>/ allow=alaw
/>/ host=dynamic
/>/ context=smvoice-sip
/>/ callerid="Jerry" <528>
/
Need to have:
nat=never (or nat=route)
Regards,
--
Jason Becker
Director & CEO
Coalescent Systems Inc.
Enabling Open Source Telephony
403.244.8089
www.coalescentsystems.ca
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
