I am trying to setup an E100P for use on Swisscom E1-PRI here in Switzerland.
Swisscom seems to use Siemens hardware.
Here are my configs (cvs from a few hours ago) :
zaptel.conf
loadzone=fr ; tried "de" but got warning at modprobe
defaultzone=fr
span=1,1,0,cas,hdb3,crc4,yellow ; Seems to be right, as the Siemens SDSL-G703 modem switches its LEDs off ... not sure
bchan=1-15,17-31
dchan=16
zapata.conf
... switchtype = euroisdn signalling = pri_cpe group = 1 channel => 1-15,17-31
When I try to dial-out, I get :
NOTICE[33809]: File app_dial.c, Line 502 (dial_exec): Unable to create channel of type 'Zap'
== Everyone is busy at this time
-- Executing Congestion("SIP/22-8f32", "") in new stack
== Spawn extension (from-sip, 32423423423, 2) exited non-zero on 'SIP/22-8f32'
Any idea ??
Thanks
_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
