Hello *-users, this is my first mail and here I have my first big problem for you...
I use Asterisk with the Bristuff-Patches and a Digium TE405P plus a quadBRI-card (european ISDN). Everything I tried (calls with speech via BRI, SIP and POTS) was succesful except the current task. I try to establish a data call (V.110) originating in a BRI terminal going to an E1-ISDN-Router. The E1-station checks whether an LLC-information is contained in the SETUP-Message and then accepts the call. Now I can see while I debug the channel (Asterisk CLI -> pri debug span #) that the LLC is received by the PBX but not sent to the PRI... Sad The result is that the PRI-station rejects the call with Cause: Incompatible destination. Here's a trace of the incoming (BRI) line: asterisk1*CLI> bri debug span 2 asterisk1*CLI> Enabled debugging on span 2 asterisk1*CLI> Protocol Discriminator: Q.931 (8) len=31 Call Ref: len= 1 (reference 125/0x7D) (Originator) Message type: SETUP (5) [04 02 88 90] Bearer Capability (len= 4) [ Ext: 1 Q.931 Std: 0 Info transfer capability: Unrestricted digital information (8) Ext: 1 Trans mode/rate: 64kbps, circuit-mode (16) Ext: 0 User information layer 1: Unknown (24) [18 01 83] Channel ID (len= 3) [ Ext: 1 IntID: Implicit, Other Spare: 0, Preferred Dchan: 0 ChanSel: Any channel selectedNo channel selected ] [70 0a 80 35 31 32 38 30 30 35 30 32] Called Number (len=12) [ Ext: 1 TON: Unknown Number Type (0) NPI: Unknown Number Plan (0) '512800502' ] [7c 06 88 90 21 45 20 bb] IE: Low-layer Compatibility (len = 8) -- Making new call for cr 125 -- Processing Q.931 Call Setup -- Processing IE 4 (cs0, Bearer Capability) -- Processing IE 24 (cs0, Channel Identification) -- Processing IE 112 (cs0, Called Party Number) -- Processing IE 124 (cs0, Low-layer Compatibility) Protocol Discriminator: Q.931 (8) len=7 Call Ref: len= 1 (reference 253/0xFD) (Terminator) Message type: CALL PROCEEDING (2) [18 01 8a] Channel ID (len= 3) [ Ext: 1 IntID: Implicit, Other Spare: 0, Exclusive Dchan: 0 ChanSel: B2 channel ] Protocol Discriminator: Q.931 (8) len=8 Call Ref: len= 1 (reference 253/0xFD) (Terminator) Message type: ALERTING (1) The outgoing (PRI) line shows: asterisk1*CLI> pri debug span 5 asterisk1*CLI> Enabled debugging on span 5 ... ... ... asterisk1*CLI> -- Accepting data call from '' to '512800502' on channel 0/2, span 2 ... ... ... -- Making new call for cr 32770 -- Requested transfer capability: 0x08 - DIGITAL asterisk1*CLI> Protocol Discriminator: Q.931 (8) len=27 Call Ref: len= 2 (reference 2/0x2) (Originator) Message type: SETUP (5) [04 02 88 90] Bearer Capability (len= 4) [ Ext: 1 Q.931 Std: 0 Info transfer capability: Unrestricted digital information (8) Ext: 1 Trans mode/rate: 64kbps, circuit-mode (16) Ext: 0 User information layer 1: Unknown (24) [18 03 a1 83 81] Channel ID (len= 5) [ Ext: 1 IntID: Implicit, PRI Spare: 0, Preferred Dchan: 0 ChanSel: Reserved Ext: 1 Coding: 0 Number Specified Channel Type: 3 Ext: 1 Channel: 1 ] [6c 02 00 c3] Calling Number (len= 4) [ Ext: 0 TON: Unknown Number Type (0) NPI: Unknown Number Plan (0) Presentation: Number not available (67) '' ] [70 06 c1 31 33 2d 32 37] Called Number (len= 8) [ Ext: 1 TON: Subscriber Number (4) NPI: ISDN/Telephony Numbering Plan (E.164/E.163) (1) '13-27' ] [a1] Sending Complete (len= 1) -- Called 13-27 asterisk1*CLI> Protocol Discriminator: Q.931 (8) len=9 Call Ref: len= 2 (reference 32770/0x8002) (Terminator) Message type: RELEASE COMPLETE (90) [08 02 80 d8] Cause (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) 0: 0 Location: User (0) Ext: 1 Cause: Incompatible destination (88), class = Invalid message (5) ] Processing IE 8 (cs0, Cause) -- Channel 0/1, span 5 got hangup Do you have any ideas if Asterisk supports LLC at all or what the solution could be? Thanks in advance, Lars -- ___________________________________________________ Play 100s of games for FREE! http://games.mail.com/ _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users