In article <[EMAIL PROTECTED]>, Jim Duda <[EMAIL PROTECTED]> wrote: > Tony, > > I downloaded fresh versions of asterisk 1.2.1 and zaptel 1.2.1 from digium. > I now have USE_RTC in the zaptel files. I recompiled and installed both. > > I updated /etc/rc.d/init.d/zaptel and removed the other modules as I don't > have any Digium cards in my system. > > lsmod results show that ztdummy is loaded. > > ztdummy 7816 0 > zaptel 195076 5 ztdummy > crc_ccitt 6400 1 zaptel > > My final issue is that ztdummy reports that it's unused (7816 0). I can > rmmod ztdummy which means that * isn't using it. Am I incorrect here? I > would assume that ztdummy would have a non zero value if * was using it.
I think it's perfectly normal. My systems look the same, but work fine. AFAIK, ztdummy isn't actually _called_by Asterisk, it just sits there in the background providing timing services to the zaptel subsystem, which Asterisk accesses via the devices in /dev/zap/ Cheers Tony -- Tony Mountifield Work: [EMAIL PROTECTED] - http://www.softins.co.uk Play: [EMAIL PROTECTED] - http://tony.mountifield.org _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
