Hi Kiss I am trying to run it on p3 machine i think it should be enough
Regard Talat On Mon, 2005-12-12 at 12:18 +0100, Kiss Karoly wrote: > Hello, > > This looks like the asterisk you are using was compiled for a higher class > CPU then the one running it. > > Regards > Kiss Karoly > > On Mon, 12 Dec 2005, Talat Ishtiaq wrote: > > > Date: Mon, 12 Dec 2005 15:48:11 +0500 > > From: Talat Ishtiaq <[EMAIL PROTECTED]> > > To: Mark Edwards <[EMAIL PROTECTED]> > > Cc: Asterisk Users Mailing List - Non-Commercial Discussion > > <[email protected]> > > Subject: Re: [Asterisk-Users] [helpp] Problem in astersik > > > > Hi Mark > > > > > > The > > > > #/usr/sbin/astersik -vc > > -------------------(many verbosity) > > Illegal instruction > > [EMAIL PROTECTED] postfix]# /usr/sbin/asterisk > > [EMAIL PROTECTED] postfix]# /usr/sbin/asterisk -rvvvv > > Unable to connect to remote asterisk > > > > still give me illegal instruction in the end. > > > > > > As long as i remember i did not get any error during make and make > > install command. > > What packages do you want me to update on my fedora core 3 machine > > Plz tell me > > > > > > Regard > > Talat > > > > > > > > > > > > > > > > > > > > > > > > > > On Mon, 2005-12-12 at 21:16 +1100, Mark Edwards wrote: > >> Hi. > >> > >> First off, the illegal instruction doesn't look at all pretty. > >> > >> The best way to start a new installation is to start asterisk thus: > >> > >> /usr/sbin/asterisk -vc > >> > >> when you get a clean start with no fatal or significant errors, you > >> can close it out and then start it as a daemon > >> > >> /usr/sbin/asterisk > >> > >> Only then can you use "-r" to connect to the remote console. > >> > >> I would suggest if you are having "illegal instruction' messages, then > >> asterisk isn't starting cleanly, and you have a significant > >> compilation issue on your hands. > >> > >> I would make sure your FC3 box is up2date and that you are not seeing > >> any significant compilation errors first. > >> > >> Once you have got things going this far, we can then look at your > >> dialplan... > >> > >> cheers, > >> > >> Mark > >> > >> On 12/12/05, Talat Ishtiaq <[EMAIL PROTECTED]> wrote: > >> Hi I am very new to asterisk > >> > >> I am facing some problems > >> I have installed asterisk on my fedora core 3 by tar.gz > >> by > >> #cd /usr/local > >> #tar -xzvf asterisk----.tar.gz > >> #make > >> #make install > >> #make samples > >> i made following changes in the sip.conf and extention.conf > >> In sip.conf > >> [500] > >> context=fromsip > >> type=friend > >> username=500 > >> secret=shanee > >> callerid="shanee" <500> > >> host=dynamic > >> nat=yes > >> canreinvite=no > >> disallow=all > >> allow=ulaw > >> dtmfmode=info > >> callgroup=3 > >> pickupgroup=3 > >> qualify=1000 > >> > >> > >> [501] > >> context=fromsip > >> type=friend > >> username=501 > >> secret=shanee > >> callerid="shanee" <501> > >> host=dynamic > >> nat=yes > >> canreinvite=no > >> disallow=all > >> allow=ulaw > >> dtmfmode=info > >> callgroup=3 > >> pickupgroup=3 > >> qualify=1000 > >> > >> In externsion.conf > >> [fromsip] > >> exten => s,1,Answer( ) > >> exten => _5XX,1,Dial(SIP/${EXTEN},100,tr) > >> exten => h,1,Hangup > >> exten => t,1,Hangup > >> exten => i,1,Hangup > >> > >> Then What i did is > >> [EMAIL PROTECTED] asterisk]# asterisk -rvvv > >> Unable to connect to remote asterisk > >> [EMAIL PROTECTED] asterisk]# asterisk -c > >> Asterisk 1.0.9, Copyright (C) 1999-2004 Digium. > >> Written by Mark Spencer <[EMAIL PROTECTED]> > >> > >> ========================================================================= > >> [ Booting...................................................Dec 10 > >> 07:09:47 WARNING[865]: chan_oss.c:257 sound_thread: Read error > >> on sound > >> device: Resource temporarily unavailable > >> ...........Dec 10 07:09:47 WARNING[865]: chan_mgcp.c:4050 > >> reload_config: > >> Unable to get our IP address, MGCP disabled > >> ...Dec 10 07:09:47 WARNING[865]: chan_skinny.c:2587 > >> reload_config: > >> Unable to get our IP address, Skinny disabled > >> ........................Illegal instruction > >> > >> > >> > >> I gave these error to forum and i got reply that you should > >> unload the > >> mgcp and skinny modules in the modules.conf > >> > >> so i unload the following modules by > >> noload => chan_mgcp.so > >> noload => chan_skinny.so > >> noload => chan_oss.so > >> > >> > >> [EMAIL PROTECTED] asterisk]# asterisk -c > >> Asterisk 1.0.9, Copyright (C) 1999-2004 Digium. > >> Written by Mark Spencer <[EMAIL PROTECTED]> > >> > >> ========================================================================= > >> [ > >> Booting......................................................................................Illegal > >> instruction > >> [EMAIL PROTECTED] asterisk]# > >> > >> > >> Then i try to start it > >> [EMAIL PROTECTED] asterisk]# asterisk -rvvvv > >> Unable to connect to remote asterisk > >> [EMAIL PROTECTED] asterisk]# > >> > >> > >> > >> So can you tell me why i am having this problem and how can i > >> solve it > >> > >> > >> > >> Regard > >> Talat > >> > >> > >> > >> _______________________________________________ > >> --Bandwidth and Colocation provided by Easynews.com -- > >> > >> Asterisk-Users mailing list > >> To UNSUBSCRIBE or update options visit: > >> http://lists.digium.com/mailman/listinfo/asterisk-users > >> > >> > >> > >> -- > >> regards, > >> > >> Mark P. Edwards > >> FWD: 667917 > > > > _______________________________________________ > > --Bandwidth and Colocation provided by Easynews.com -- > > > > Asterisk-Users mailing list > > To UNSUBSCRIBE or update options visit: > > http://lists.digium.com/mailman/listinfo/asterisk-users > > _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
