On Fri, 2005-12-09 at 15:53 +0000, Jason Williams wrote: > > > > chan_capi registers fine: > > > > > ********************************************************************** > > > [chan_capi.so] => (Common ISDN API for Asterisk) > > > == This box has 1 capi controller(s). > > > == Reading config for BRI1 > > > -- ast_capi_pvt BRI1-pseudo-D > (<MSN1>,<MSN2>,capi-in,0,2) (1,4,128) > > > -- ast_capi_pvt BRI1 (<MSN1>,<MSN2>,capi-in,0,2) > (1,4,128) > > > -- ast_capi_pvt BRI1 (<MSN1>,<MSN2>,capi-in,0,2) > (1,4,128) > > > -- listening on contr1 CIPmask = 0x1fff03ff > > > == Registered channel type 'CAPI' (Common ISDN API > Driver ($Revision: > > > 1.115 $) ) > > > == Registered application 'capiCommand' > > > == Registered custom function VANITYNUMBER > > > > > > Call from my GSM to a SIP phone (exten 1003) via ISDN/CAPI > (MSN2): > > > > ********************************************************************** > > > == BRI1: Incoming call '<my GSM>' -> '<MSN2>' > > > > > > -- Executing Macro("CAPI/BRI1/<MSN2>-0", "stdexten| > 1003|SIP/1003") > > > in new stack > > > -- Executing Dial("CAPI/BRI1/<MSN2>-0", "SIP/1003|10| > TtwW") in new > > > stack > > > Dec 6 02:30:47 WARNING[28889]: channel.c:2494 > ast_request: No > > > translator path exists for channel type SIP (native 65535) > to 0 > > > Dec 6 02:30:47 NOTICE[28889]: app_dial.c:1011 > dial_exec_full: Unable to > > > create channel of type 'SIP' (cause 0 - Unknown) > > > == Everyone is busy/congested at this time (1:0/0/1) > > Looks like a codec problem when making calls to the SIP phone, ensure > your sip phone has Alaw enabled in sip.conf, and supports the g711alaw > codec. In its config
The phone has alaw enabled and this exact same setup works fine on a i686 setup. Regards, Patrick _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users