hi,
Interesting boxes - I might get one of these myself for playing around
with....
A 266 Mhz CPU is far more capable than you actually think and I have
been running 500 ports on a 300 Mhz PII earlier...BUT, I did not use
passive Digium boards.
The Digium boards are CPU intensive for 2 main reasons: (1) they have a
very low buffer on the bus forcing an interrupt far to often, and (2)
they need things like echo cancel and dtmf to run on the host computer.
Maybe you can handle 4-6 calls ??? But, you can definitly handle 60
calls with echo cancel & dtmf 'as is'. I would go for a Dell 1U
mahine (they cost from 400.- GBP) or if you insist on using these chose
an intelligent board to off-load the host.
jvb
Chris Bagnall wrote:
Would anyone have recommendations for a small or embedded
system suitable for running Asterisk on? Ideally, we'd like two boxes:
- One using compact flash, and is fanless, with rapid booting.
- One with a hard disk for voicemail, call recording, etc.
Preferably they would be capable of bridging 60 calls Zap-Zap
or Zap-SIP, but we're willing to consider less powerful
systems. The ability to take a single Digium card is desirable.
We've recently ordered a pair of these:
http://www.soekris.com/net4801.htm
Which have a standard PCI slot into which I'm hoping a TDM card will work.
Their Belgian distributor (kd85.com) appears to have a nice range of
expanded cases that might (hopefully) take a TDM card. I'll find out when
they arrive I guess.
I'm not sure whether a 266Mhz processor would stand a hope in hell of
running 60 calls though - I'll leave that one for someone else to answer.
Fortunately our requirement is only for 4-6 concurrent calls.
Regards,
Chris
|
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
