Steve Totaro wrote:
What are you doing in between making changes and testing the changes?
After changing settings I reboot system! Really. :)
Because other actions have no effect. Also reboot, too..
Thanks,
Steve
Just a couple guesses on things to try.
Zapata.conf
1. Changing switchtype variables (doubtful but give it a try).
2. Add a variable to define "pridialplan" (I remember someone
setting
this to "unknown" to solve a similar issue) Try pridialplan=unknown
and/or prilocaldialplan=local or some other valid option.
A do this config, but no effects....
Zaptel.conf
1. span=1,1,5,ccs,hdb3
I think that your dial statement or the pridialplan is your issue.
If
you look at the debug info
Here is something suspicious: "-- Called g1/100" unless 100 is the
number you are trying to dial outbound.
If the above fails, then try below.
Try tweaking your settings here like span=1,0,0,ccs,hdb3
What is the provider expecting?
No effect on settings:
span=1,0,0,ccs,hdb3
span=1,1,5,ccs,hdb3
span=1,2,4,ccs,hdb3
Thanks,
Steve
Dear Users,
I have an Digium Wildcard TE110P T1/E1 Card inserted in Linux box
runnig
Asterisk 1.2.0
All incoming calls from E1 interface to SIP-phone goes exellent, but
calls from SIP to E1 gives the errors:
-- Executing Dial("SIP/anton-6cf4", "Zap/g1/100") in new stack
-- Making new call for cr 32775
-- Requested transfer capability: 0x00 - SPEECH
Protocol Discriminator: Q.931 (8) len=43
Call Ref: len= 2 (reference 7/0x7) (Originator)
Message type: SETUP (5)
[04 03 80 90 a3]
Bearer Capability (len= 5) [ Ext: 1 Q.931 Std: 0 Info transfer
capability: Speech (0)
Ext: 1 Trans mode/rate: 64kbps,
circuit-mode (16)
Ext: 1 User information layer 1:
A-Law
(35)
[18 03 a9 83 81]
Channel ID (len= 5) [ Ext: 1 IntID: Implicit, PRI Spare: 0,
Exclusive Dchan: 0
ChanSel: Reserved
Ext: 1 Coding: 0 Number Specified
Channel
Type: 3
Ext: 1 Channel: 1 ]
[28 05 41 6e 74 6f 6e]
Display (len= 5) +)[EMAIL PROTECTED]@[EMAIL PROTECTED]@&│@>[ Anton ]
[6c 0d 21 81 38 34 37 37 33 36 31 38 31 38 33]
Calling Number (len=15) [ Ext: 0 TON: National Number (2) NPI:
ISDN/Telephony Numbering Plan (E.164/E.163) (1)
Presentation: Presentation permitted,
user
number passed network screening (1) '84773618183' ]
[70 04 a1 31 30 30]
Called Number (len= 6) [ Ext: 1 TON: National Number (2) NPI:
ISDN/Telephony Numbering Plan (E.164/E.163) (1) '100' ]
-- Called g1/100
< Protocol Discriminator: Q.931 (8) len=9
< Call Ref: len= 2 (reference 7/0x7) (Terminator)
< Message type: DISCONNECT (69)
< [08 02 80 90]
< Cause (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) 0: 0
Location: User (0)
< Ext: 1 Cause: Unknown (16), class = Normal Event
(1) ]
-- Processing IE 8 (cs0, Cause)
-- Channel 0/1, span 1 got hangup request
Dec 5 15:30:12 WARNING[30946]: app_dial.c:706 wait_for_answer:
Unable
to forward voice
NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Disconnect
Indication,
peerstate Disconnect Request
Protocol Discriminator: Q.931 (8) len=9
Call Ref: len= 2 (reference 7/0x7) (Originator)
Message type: RELEASE (77)
[08 02 81 90]
Cause (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) 0: 0
Location: Private network serving the local user (1)
Ext: 1 Cause: Unknown (16), class = Normal Event
(1) ]
-- Hungup 'Zap/1-1'
== No one is available to answer at this time (1:0/0/0)
< Protocol Discriminator: Q.931 (8) len=9
< Call Ref: len= 2 (reference 7/0x7) (Terminator)
< Message type: RELEASE COMPLETE (90)
< [08 02 80 d1]
< Cause (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) 0: 0
Location: User (0)
< Ext: 1 Cause: Unknown (81), class = Invalid
message
(5) ]
-- Processing IE 8 (cs0, Cause)
NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Null, peerstate Null
NEW_HANGUP DEBUG: Destroying the call, ourstate Null, peerstate Null
-- Timeout on SIP/anton-6cf4
== CDR updated on SIP/anton-6cf4
-- Executing Hangup("SIP/anton-6cf4", "") in new stack
/etc/zaptel.conf
span=1,1,5,ccs,hdb3
bchan=1-15,17-31
dchan=16
loadzone = nl
defaultzone=nl
/etc/asterisck/zapata.conf
[trunkgroups]
[channels]
language=en
signalling=pri_cpe
switchtype=euroisdn
echocancel=32
echocancelwhenbridged=yes
usecallerid=yes
callerid=asreceived
transfer=yes
overlapdial=yes
cancallforward=yes
group=1
context=zapata
channel => 1-15,17-31
Has anybody resolve this problem?
--
SY,
Anton V Bakulev.
MIPT-telecom.
[EMAIL PROTECTED]
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
--
С уважением,
Бакулев Антон.
МФТИ-телеком.
тел. +7(095)576-4381, +7(095)408-7733
факс. +7(095)576-4563
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
