What I really want to be able todo is use the services button or any of
the other buttons that serve no purpose right now.
I would like to have it start a page (which on my * box is just dialing
a particular extension), I have this working on my Polycom 501's using
the 3rd line appearance, however I would rather keep that a line appearance.
I would also like to be able to use a button to park a call. My users
can usually get it right at this point, but they still mess it up far
too often.
Matt
Bill Gibbs wrote:
Yeah I just got in a 301 to test and I can configure a key (for example
in sip.cfg key.IP_300.2.function.prim="Messages"/> and then when I hit
the line 2 key it drops me right into VM (since I have that configured
too)
Still playing around, I noticed that if you get the soft keys (the menu
ones under the LCD) then it ALWAYS is that function...
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Matthew
Sent: Friday, December 09, 2005 9:06 AM
To: [EMAIL PROTECTED]; Asterisk Users Mailing List -
Non-Commercial Discussion
Subject: Re: [Asterisk-Users] Polycom 501 remapping keys
There has been a fair amount of converstaion about this, but I'm not
sure anyone really has this working. I had exactly the same problem
that the button got remapped to a volume up function. The only button
remapping I got working was to map the Transfer button to the # key so
that when you hit Transfer it started and Asterisk based transfer.
I would love to hear from someone who has this working.
Matthew O'Connor
[EMAIL PROTECTED] wrote:
I've tried to configure the "services"-key on my Polycom 501 to run a
SpeedDial-entry in [MACADRESS]-directory.xml (which would call a
asterisk-extension that starts SayUnixTime) but i have not been able to
accomplish my goal. Whe configuring the SpeedDial-function in sip.cfg
"VolUp" is started when i press the Services-Key.
Also some other possible functions listed under 4.6.1.15 in the SIP
1.6 Administrator Guide fail. Some of them were working with the
expected function, some where not giving any response at all but some
where starting totally different functions, e.g. configuring "Redial" as
the function starts "Settings", function "Messages" starts "Redial",
"SpeedDialMenu" starts "VolUp", "VolUp" starts "Line1" :-[
I've seen that other failed as well
(http://lists.digium.com/pipermail/asterisk-users/2005-October/130129.ht
ml) - anyone ever got this working? Maybe with BootROM 3.0/3.1? Or
should i downgrade to 1.5 where there was a ipmid-file for
remapping-info...?
I'm running Firmware 1.6.2.0041/BootROM 2.6.2.0032
regards
Christian
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
