Andrew I am having trouble with
Sound ( only if you dialling from outside ) Cisco phone can not dial out If I phone in and select extension number of Cisco phone * dies Any ideas ??? Regards Mick -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of [EMAIL PROTECTED] Sent: Saturday, 11 October 2003 9:54 PM To: [EMAIL PROTECTED] Subject: Re: [Asterisk-Users] voicetronix Yes, I have. Ahh, lets see: - I grabbed the redhat kernel src rpm, and recompiled. - I then setup the vpb driver. - Oh, a big thing. when you get the cards, MAKE SURE the revision is greater than 19, otherwise it doesn't detect line drops correctly. - And uhm. lets see. I had problems getting asterisk to correctly dial a number, where as gnugk could dial numbers fine. Lets see. Thats pretty much the big things. It was recommended that the digium hardware be used, due to its more likely to work. But uhm. Overall, it worked for me, when I was doing that stuff (I nolonger work where I used to). Thanks, Andrew Griffiths P.S This was typed while a bit drunk. So ignore the typos. Thanks. On Sat, Oct 11, 2003 at 07:07:46PM +0930, [EMAIL PROTECTED] wrote: > anyone out there got * to work with > > a voicetronix openline4 card ??? > > > > > Regards Mick > > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
