|
Yeah, the zttool program shows the PRI as having No Alarms. It is
an Infinity system by Amtelco. I haven't actually tried making a call
from the other pbx, but I did have my vendor (Amtelco) look at it and
they verified that the span was up and everything was working
correctly. The asterisk system is set to signalling=pri_net which I
assumed meant that the asterisk box would be handling the timing. Here is the output from "pri show span 1" asterisk1*CLI> pri show span 1 Primary D-channel: 24 Status: Provisioned, Up, Active Switchtype: Q.SIG switch Type: Network Window Length: 0/7 Sentrej: 0 SolicitFbit: 0 Retrans: 0 Busy: 0 Overlap Dial: 0 T200 Timer: 1000 T203 Timer: 10000 T305 Timer: 30000 T308 Timer: 4000 T313 Timer: 4000 Michael Sampson Information Systems Manager Customer Contact Services [EMAIL PROTECTED] 952-936-4000 O'Connor, Jonathan wrote: Michael,Does the zttool program show the PRI as working correctly? Can the PBX push calls into the Asterisk system? Also, what type of PBX is it, and is it providing the clock etc.. For the T1 connection? -Jonathan Jonathan O'Connor Senior System Administrator Inoveris LLC Direct Line (614) 791-3742 Fax (614) 791-3748 Helpdesk 866-456-1566-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of Michael Sampson Sent: Monday, December 19, 2005 9:30 AM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: [Asterisk-Users] Can't call out on ZAP channel - need help I'm trying to connect to another PBX via an T-1 interface. I have a T100P card. On the CLI I get the error "Everyone is busy/congested at this time (1:0/0/1)" When I try to dial out of the T-1 line from an SIP softphone. I have posted this question a few times here and at the asterisk forum, but can't get anyone to respond. I've seen other people on forums with the same problem but no one has ever given much of a solution. Does someone at least know what the next step in debugging this problem would be. In the file /var/log/asterisk/full I get the error "Unable to create channel of type 'ZAP'" Here are my configs. Zapata.conf ------------------ ; ; Zapata telephony interface ; ; Configuration file [trunkgroups] [channels] language=en context=from-pstn ;signalling=fxs_ks signalling=pri_net ; pri_cpe= PRI slave ; pri_net = PRI master switchtype=qsig pridialplan=local resetinterval=never ;rxwink=300 ; Atlas seems to use long (250ms) winks ; ; Whether or not to do distinctive ring detection on FXO lines ; ;usedistinctiveringdetection=yes callerid=asreceived usecallerid=yes hidecallerid=no callwaiting=yes usecallingpres=yes callwaitingcallerid=yes threewaycalling=yes transfer=yes cancallforward=yes callreturn=yes echocancel=yes echocancelwhenbridged=yes echotraining=400 rxgain=0.0 txgain=0.0 group=1 callgroup=1 pickupgroup=1 immediate=no ;faxdetect=both faxdetect=incoming ;faxdetect=outgoing ;faxdetect=no ;Include genzaptelconf configs #include zapata-auto.conf ;Include AMP configs #include zapata_additional.conf channel => 1-23 ------------------------- Zaptel.conf ------------------------- # Autogenerated by /usr/local/sbin/genzaptelconf -- do not hand edit # Zaptel Configuration File # # This file is parsed by the Zaptel Configurator, ztcfg # # It must be in the module loading order # Span 1: WCT1/0 "Digium Wildcard T100P T1/PRI Card 0" # channel 1, WCT1, unhandled for now # channel 2, WCT1, unhandled for now # channel 3, WCT1, unhandled for now # channel 4, WCT1, unhandled for now # channel 5, WCT1, unhandled for now # channel 6, WCT1, unhandled for now # channel 7, WCT1, unhandled for now # channel 8, WCT1, unhandled for now # channel 9, WCT1, unhandled for now # channel 10, WCT1, unhandled for now # channel 11, WCT1, unhandled for now # channel 12, WCT1, unhandled for now # channel 13, WCT1, unhandled for now # channel 14, WCT1, unhandled for now # channel 15, WCT1, unhandled for now # channel 16, WCT1, unhandled for now # channel 17, WCT1, unhandled for now # channel 18, WCT1, unhandled for now # channel 19, WCT1, unhandled for now # channel 20, WCT1, unhandled for now # channel 21, WCT1, unhandled for now # channel 22, WCT1, unhandled for now # channel 23, WCT1, unhandled for now # channel 24, WCT1, unhandled for now # Global data span=1,1,0,esf,b8zs bchan=1-23 dchan=24 #fxsks=1 loadzone = us defaultzone = us ----------------------------- -- Michael Sampson Information Systems Manager Customer Contact Services [EMAIL PROTECTED] 952-936-4000 _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users_______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users |
_______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
