> Is there a way (via AMP ) to route a call based on the DID , or better > based on the inbound channel number > > I had non problems doing that with AMP and with digium PRI Cards, but now > for the first time I am trying to use a TDM400 card > > It seems that DID is non populated.
There is no such thing as DID in the analog TDM environment. > I also tryed this: > > ;## ora la scheda TDM400 con 4 moduli rossi (da linea) (fxs) > group=1 > callgroup=11 > pickupgroup=11 > signalling=fxs_ks > context=from-pstn > > callerid="Linea 1"<0123456789> > channel => 1 > callerid="Linea 2"<9876543210> > channel => 2 > callerid="Linea 3"<0123456789> > channel => 3 > callerid="Linea 4"<0123456789> > channel => 4 > ;channel => 1-4 > > and I tryed to define the inbound routing based on the callerID 9876543210; > non chance at all. > > If it were a way to route the incoming call according to che analog channel > which is "ringing", it could be ok for me. If I understand your objective correctly, try this: In zapata.conf, context=first_channel channel => 1 context=sec_channel channel => 2 context=third_channel channel => 3 etc Then in extensions.conf, use something like this: [first_channel} exten => s,1,Dial(SIP/111,15) exten => s,2,Voicemail(u111) exten => s,102,Voicemail(b111) [sec_channel] exten => s,1,Dial(SIP/222,15) exten => s,2,Voicemail(u222) exten => s,102,Voicemail(b222) etc. _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users