There are a few methods of doing this without rewriting code... On our
system, we have 2 asterisk servers that actually run the phones, a
voicemail server, and a gateway... whenever a call comes into the
voicemail server, we have an 'h' extension that checks to see if the
person does in fact have voicemail, and then touches or removes a file
in the phone's mailbox on the two primaries, which cause the MWI light
to come on. It's probably considered half-assed, but it works like a
charm for us.
Aaron
Olle E Johansson wrote:
Tim Connolly wrote:
I have a pair of servers tied to PRI's which only do SIP/ZAP/IAX
terminations and routing. The IVR/Voicemail is on a separate server
which
accepts calls from the front line servers via Iax. I am trying to use
the
MWI on our Cisco 7960 phones, which isn't working, but I think its
because
the voicemail server doesn't have the phones in its list of sip
peers. Does anyone know of a way to fix this?
There is no communication between your SIP registration server and the
voicemail Asterisk. The only way to fix this is to start developing
new code :-)
/O
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
