On Dec 21, 2005, at 7:53 AM, Rhonda Herron wrote:
Hi, Thanks for the reply...
The clicks are on every call and every few minutes or so, I guess
you could call it regular intermittance? :)
The only option for DTMF on my IAX phones are inband and outband-
neither of which will respond to a menu prompt. I discovered I had
to use outband just to use the phone's voicemail menu, so that is
what it is set to. I cant specify DTMF in the IAX extension setup
either- only on SIP extensions, for which I have no devices.
Not an IAX expert, but the last time I looked it always wanted to
decode dtmf and carry in signalling messages. Perhaps someone more
knowledgable can clarify. Plus if using other than G711 dtmf will be
problematic if inband.
For clarification on the outgoing dialing- I dial a number, the
phone says Please Dial....... for approx 9 secs, and then says
Calling #########. I have looked at all the places I can think of
for max silence settings (thinking it would be like the voicemail
maxsilence=# variable) but no luck.
This sounds like the phone is using a timer not a digitmap to know
when you have completed dialing. try hitting the # key when done
dialing and see if that spees things up. The # is frquently used to
indicate dialing completion. At least then you will know where to
look to adjust.
R
Martin Joseph wrote:
On Dec 20, 2005, at 1:01 PM, Rhonda Herron wrote:
Hi,
I have been battling with the following problems for a while and
was hoping someone could shed some light on the subject.
I am using AT320 402 IAX2 phones with 1.49 firmware (latest)
connected to an Asterisk server running [EMAIL PROTECTED] 2.1 (includes
Asterisk 1.2 and AMP 1.10).
I am using ulaw codec but will upgrading to g729 within the week.
And on to the questions:
G.729 definitely helped my call quality across the internet.
Within my LAN ulaw works great and sounds better.
1. During all calls there are periodic 'clicks' that sound as if
one of the party's have hung up, about every 2 minutes or so.
hmmm, Is this intermittent?
2. When calling, lets say for example Dell tech support, if the
user is prompted to select a menu option the number they dial is
not translated and the menu just keeps on going.
I couldn't use inband DTMF with my equipment, I had to use
rfc2833, which is set in both my equipment and the extensions that
correspond.
3. The time between dialing an outgoing number and actual
connection is painfully long- is this configurable in Asterisk
somewhere?
You might looks for extra waits in your dial plan extension that
calls out? I don't notice mine being too long, although I hear
two different dial tones at times. Depends on how your calls are
terminated.
Oh, and my outgoing provider is voipjet and incoming is Teliax.
Teliax has been out for two days here for me, although it's back
now...
Marty
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
--
Rhonda Herron
Network Administrator
Reliance Software Systems, Inc.
30500 Northwestern Highway, Suite 415
Farmington Hills, MI 48334
Tel 248.865.7850
[EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]>
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
